Waste incineration power generation slag sorting equipment

Waste incineration power generation slag sorting equipment

With the improvement of people's living standards, the amount of urban garbage is also constantly increasing. The treatment of garbage has become an important aspect of urban management. Incineration of garbage for power generation is currently one of the more common methods of garbage treatment. During the process of incineration of waste for power generation, the generated slag needs to be sorted and treated to ensure environmental hygiene and resource recycling. This article will introduce a waste incineration power generation slag sorting equipment and related operating steps.

1、 Equipment Introduction

The incineration waste power generation slag sorting equipment is a device that integrates various functions such as slag separation, magnetic separation, vibration screening, and transportation. It uses advanced physical separation technology to separate metal, glass, ceramics and other impurities from the slag, so as to achieve the purpose of Recycling. The equipment has a compact structure, simple operation, and convenient maintenance, which can meet the needs of different scale incineration waste power plants.

2、 Operating Steps

1. Start the device

Before using the slag sorting equipment, it is necessary to start the equipment. First, connect the equipment to the power supply and air supply, and check whether the various indicators of the equipment are normal. Then, press the start button and wait for the device to complete its self check before entering normal working mode.

2. Adjust the vibration screening parameters

In the process of slag separation, vibration screening is a very important step. By adjusting the parameters of vibration screening, different sizes of slag can be screened. Adjust the amplitude and frequency of vibration screening according to the actual situation to achieve the best screening effect.

3. Conduct slag separation

The slag to be processed is fed into the slag sorting equipment through a conveyor belt, and the equipment will automatically separate impurities such as metal, glass, and ceramics. The separated impurities will be transported to the corresponding collection boxes, while the pure slag will continue to be transported to the next step of treatment.

4. Conduct magnetic separation processing

During the process of slag separation, there may be some iron impurities that cannot be separated. At this point, magnetic separation processing is required. The slag can be treated through a magnetic separator to separate the iron impurities in it for subsequent treatment and recycling.

5. Carry out conveying treatment

After slag separation and magnetic separation treatment, the remaining slag can be directly transported and processed through a conveyor belt. During the transportation process, it is necessary to pay attention to the stability and uniformity of the slag to ensure the subsequent treatment effect.

III. Summary

The incineration waste power generation slag sorting equipment is a very practical device that can achieve the separation and recycling of impurities in the slag, achieving the goals of environmental protection and resource conservation. During the use of equipment, it is necessary to pay attention to the operating procedures and maintenance to ensure the normal operation and service life of the equipment.

Waste incineration power generation slag sorting equipment

Waste incineration power generation slag sorting equipmentRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen