Zirconium sand gravity separation method

Zirconium sand gravity separation method

Zirconium sand is an important raw material widely used in fields such as ceramics, electronics, and chemical engineering. The quality of zirconium sand directly affects the quality of the product, so it is necessary to re select zirconium sand. There are many methods for zirconium sand re selection, and this article will introduce several commonly used zirconium sand re selection methods and their operating steps.

1、 Wet selection method

Wet separation method is a commonly used zirconium sand gravity separation method. Its principle is to use the difference in specific gravity of water to separate impurities and zirconium sand. The specific operation steps are as follows:

1. Put the zirconium sand into water and stir evenly to make the impurities float on the water surface.

2. Remove the impurities floating on the water surface, and then separate the zirconium sand from the water.

3. Dry the separated zirconium sand.

2、 Dry selection method

Dry separation method is a relatively simple zirconium sand gravity separation method. Its principle is to separate zirconium sand and impurities based on their size and weight differences. The specific operation steps are as follows:

1. Place the zirconium sand into the sieve and gently shake the sieve with your hand to prevent impurities from falling into the container below.

2. Dry the separated zirconium sand.

3、 Airflow sorting method

The airflow separation method is an efficient zirconium sand gravity separation method. Its principle is to use airflow to separate zirconium sand and impurities. The specific operation steps are as follows:

1. Place the zirconium sand into the airflow separator.

2. Turn on the airflow sorting machine, adjust the airflow speed and direction to separate zirconium sand and impurities.

3. Collect the separated zirconium sand.

4、 Magnetic separation method

The magnetic separation method is a special zirconium sand gravity separation method. Its principle is to use magnetism to separate magnetic impurities from zirconium sand. The specific operation steps are as follows:

1. Place the zirconium sand into the magnetic separator.

2. Turn on the magnetic separator, adjust the magnetic field strength and direction to separate magnetic impurities and zirconium sand.

3. Collect the separated zirconium sand.

Above are several commonly used zirconium sand gravity separation methods and their operating steps. Different methods of zirconium sand re selection are suitable for different situations, and appropriate methods need to be selected based on the actual situation. Attention should be paid to safety during operation to avoid dangerous situations.

Zirconium sand gravity separation method

Zirconium sand gravity separation methodRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen