Product information display/Product display

Characteristics of Spiral Chutes

24-hour phone/WhatsApp：+8619870423316

Characteristics of Spiral Chutes

Introduction to the characteristics of spiral chutes. Chute beneficiation includes the process of inclined flow separation. The slurry is fed to a inclined groove or inclined surface, and with the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter minerals in the upper layer are quickly discharged to the outside of the groove, while the heavy ore materials in the lower part stagnate in the inner groove or flow out at a slow speed from the lower part. After being collected separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for sand mining and beneficiation in bays, riverbanks, sandbanks, and streams. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, large processing output, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The slurry with the same technical principle is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove for selection. The tail end of the rotating groove is equipped with a valve block type equipment to select the groove, allowing the sorted products to be divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to obtain the width of each device, the product gathering hopper will differentiate and densely extract the intercepted multi-directional mineral flow. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. The third feature of the 螺旋溜槽的特征 spiral chute is its high efficiency, high recovery rate, and accurate beneficiation; 2. No power required; 3. Lightweight, anti rust, durable, anti wear, and strong corrosion resistance; 4. Low operating costs and long application life. Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The characteristics of the spiral chute are 螺旋溜槽的特征 . 4. Which is the best one for the construction of the fiberglass spiral chute? The spiral concentrator consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment intercepting groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The spiral groove has a pre made wear-resistant layer on the selected surface. She has the advantages of light weight, strength, durability, and the use of consumables. Above the rotating groove is a multi tube ore feeding homogenizer, which distributes ore evenly and has simple control. The mineral separator is not limited to being placed on a cross (or tripod) on a support table. The uniform slurry is slowly fed to the surface of the rotating groove through the feeding groove installed on the spiral groove head, and sorting is carried out. The tail of the spiral groove is installed in the valve type new product acquisition groove, and the selected new products are divided into three types (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The cross section of the spiral chute and the different slopes of the curve are particularly suitable for the separation of fine particle materials. 5、 Scope of adoption. Features of spiral chute The spiral chute is suitable for separating fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium, gold ore, coal, monazite ore, Rutile ore, zircon, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. Features of Spiral Chutes 螺旋溜槽的特征 Features of Spiral Chutes