Spiral chute flushing water position

Spiral chute flushing water position

Spiral chute flushing water position. 1、 The equipment introduces a gravity separation machine for mineral mortar that uses inertial centrifugal force in rotary spiral motion to perform lightweight and heavy mineral sorting. 2、 Use the spiral chute beneficiation technology, set up the spiral concentrator, calibrate the vertical line, fix it in the proper position with iron shelves or wood, send the sand ore to the two ore feeding ports on the top of the spiral top by the slurry pump, add water, adjust the density of the mineral slurry, and the slurry will naturally rotate from high to low, generate a single coherent centrifugal force in the flow speed of the rotating slope, and obtain the specific gravity, Granularity The difference in state is achieved by the separation of sand and ore through the action of gravity and centrifugal force obtained through swirling flow. The concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. Location 3, Characteristics, and Highlights of the Flushing Water for the Spiral Chute. Spiral chute flushing water position 1. Heavy duty, high processing capacity, and the objective need for contemporary mineral processing to create benefits through economies of scale. 2. Fine granulation: the treatment of fine and small particle size minerals is very important for the treatment of ore materials with a particle size of -0.047MM. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple application of gravity and water flow blocking force to composite application of centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals and the separation of fine or fine particles are increased, thereby improving the ore recovery rate. 4. With energy conservation, environmental protection and consumption reduction as the basic starting point, the area and space should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. Spiral chute flushing water position . 4、 The structural composition of the fiberglass chute consists of six parts: a feeding homogenizer, a feeding trough, a rotating trough, an equipment acquisition trough, a product gathering hopper, or a trough bracket (including a cross or triangular frame), etc. The spiral groove formed by connecting spiral pieces is the main component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a pre designed durable anti wear layer. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for screening ore, which is simple to operate. The mineral separator does not need to be restricted to placing on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through a feeding chute installed at the head end of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric annular tube that allows the selected variable ore flows to be densely exported. The transverse surface of the fiberglass spiral chute and the slope of the curve change, which is particularly suitable for the separation of small particle mineral materials. 5、 Use: spiral chute manufacturer, spiral chute washing water level This equipment is used to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosgenite, wolframite, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare mineral metals and non-metallic minerals with different density and specific gravity differences. Spiral chute flushing water position Spiral chute flushing water position

Spiral chute flushing water position

Spiral chute flushing water positionRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen