Product information display/Product display

Spiral chute selection of diamond sand

24-hour phone/WhatsApp：+8619870423316

Spiral chute selection of diamond sand

Spiral Chute Selection of Diamond Sand, Spiral Chute Selection of Diamond Sand 1. Introduction: Gravity beneficiation spiral chutes combine the characteristics of gravity beneficiation spiral chutes, fiberglass spiral chutes, shakers, and beneficiation centrifuges. After relevant scientific research organized by the Ministry of Metallurgical Industry, appraisal by departments such as design, university, and beneficiation company, it is recognized that this equipment has excellent performance and progress in beneficiation indicators. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry, Now it is widely used in nonferrous and Ferrous mines. This product is suitable for sorting iron ore, ferrotitanium, ferrochrome, pyrite, zircon, Rutile, monazite, ethylene phosphate, tungsten, tin placer, tantalum, tantalum niobium and other nonferrous metal ores, rare ore metals and non-metallic ore bodies with density and specific gravity differences. 2、 The working principle is that the spiral chute selects mineral mortar equivalent to diamond sand and slowly feeds it onto the surface of the rotating groove by installing the feeding chute at the end of the spiral groove head, to implement selection. The tail of the spiral groove is equipped with a valve block type equipment to select the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows the obtained multi head ore flow to be collected and exported separately. The cross section and slope of the curve of the fiberglass chute are very suitable for the sorting of fine particle materials. 螺旋溜槽选金刚砂 Spiral Chute Selection of Diamond Sand 3. Features 1. Stable sorting process and easy control 2. Wide range of allowable changes in feed density 3. Ultra high enrichment ratio and high recovery probability 4. Small footprint and low water consumption 5. Simple structure without power 6. Strong processing capacity. 7. Installation is simple and easy to operate. 8. Input is small, effective, and fast. The spiral chute is made of emery glass fiber reinforced plastic and consists of six parts: a feeding distributor, a feeding groove, a rotating groove, an equipment acquisition groove, a product gathering bucket, or a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is the main component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a pre designed durable anti wear layer. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for screening ore, which is simple to operate. The mineral separator does not need to be restricted to placing on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through a feeding chute installed at the head end of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric annular tube that allows the selected variable ore flows to be densely exported. The transverse surface of the fiberglass spiral chute and the slope of the curve change, which is particularly suitable for the separation of small particle mineral materials. Spiral chute is suitable for processing 0.6-0.03mm and vein ore or ore sand, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and river sand mines, as well as sand gold mines. Spiral Chute Selection of Diamond Sand 螺旋溜槽选金刚砂 Spiral Chute Selection of Diamond Sand