Spiral chute forming machine

Spiral chute forming machine

Spiral Chute Forming Machine 1. Overview. The gravity beneficiation spiral chute combines the characteristics of the spiral concentrator, spiral concentrator, shaking table and centrifuge for beneficiation. It has been appraised by the Ministry of Metallurgical Industry for relevant scientific research, design, universities, concentrators and other units. It believes that this kind of equipment has superior performance, has made progress in sorting indicators, and has won the Scientific and Technological Research Achievement Award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is suitable for separating fine materials with a particle size of 0.3-0.02 mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphate rock, tungsten ore, cassiterite, tantalum, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. 2、 Operating principle. The uniform mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head of the spiral groove for selection. The tail of the spiral groove is equipped with a valve type product acquisition groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each equipment, the product gathering hopper enables the selected multi head ore flow to be densely led out. The transverse section of the fiberglass chute has a change in the slope of the curve, which is particularly suitable for the selection of fine-grained materials. Spiral Chute Forming Machine III. Differences between Characteristic Spiral Chutes and Spiral Concentrators. 1. The sorting process is stable and easy to operate. 2. The feeding density allows for a large range of different materials. 3. The enrichment ratio is very high, and the recycling rate is high. 4. The land area is relatively small, and the water consumption is small. 5. The structure is simple, without the need for power. 6. The processing output is large. 7. The installation is simple and easy to operate. 8. The input is low, and the efficiency is fast. The spiral chute forming machine is . 4. According to the particle size of the processed ore, the chute can be divided into three types: (1) Coarse particle spiral chutes, The maximum particle size for ore feeding is above 2-3 millimeters, with a maximum of 100-200mm. (2) Mineral sand chute, processing 2-3 mm particle size mineral materials. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Scope of application. The fiberglass spiral chute is suitable for processing 0.6-0.03MM and other veins and minerals, but it is unfavorable for sorting when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin ore sand, niobium tantalum ore, coastal and riverside placer mines, and sand gold mines. Spiral Chute Forming Machine Spiral Chute Forming Machine

Spiral chute forming machine

Spiral chute forming machineRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen