Illustration of coal washing spiral chute

Illustration of coal washing spiral chute

Coal washing spiral chute diagram 1, product description. A gravity separation machine that uses the inertial centrifugal force generated by slurry in spiral rotation motion to achieve the separation of light and heavy minerals. How much is the manual cost of installing a belt spiral chute per ton? Illustration 2 of the coal washing spiral chute. Application method: Set up the spiral concentrator, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable position, and use a sand pump to deliver the ore sand to the two feeding ports above the spiral. The sand is mixed with supplementary water to adjust the density of the ore mortar. The ore sand slurry naturally flows from high to low, and a centrifugal force of inertia occurs in the rotating slope flow rate, Based on the differences in density, specific gravity, particle size, and state of mineral sand, gravity and centrifugal force are obtained through swirling flow to separate the sand from the ore. The selected ore flows into the concentrate hopper and is piped out, while the tailings enter the tailings hopper and are piped to the sand tank. They are then discharged by a sand pump, completing the entire flow process of mineral processing. Coal Washing Spiral Chute Diagram 3. Characteristics and Advantages 1. Large scale and large processing output. Nowadays, the overall requirement for processing mineral materials is to establish profits through scale efficiency. 2. Fine granulation is used for the treatment of fine and small particle grade mineral materials, especially for particles with a particle size of -0.047mm. Originally, the mechanical system was able to ensure the recovery of a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., the spiral concentrator has developed from simply using gravity and water flow resistance force to the level of composite applicable centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable mineral materials or the separation of fine and fine particles can be increased, thereby improving the mineral recovery rate. Diagram 4 of spiral chute for coal washing: based on energy saving, energy consumption reduction and environmental protection, it occupies a small area, space, water and electricity consumption. 5. The operation is simple and flexible, the selection process is stable, and the structure is simple and easy to repair and manage. Schematic diagram of coal washing spiral chute IV. Structural composition. The fiberglass spiral chute is composed of six parts, including a feeding homogenizer, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper, and a bracket (including a cross or triangular frame) for this groove. The rotating groove connected by spiral blades is a key component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and connected together by bolts. The spiral groove has a pre made wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotary groove is equipped with a multi tube ore feeding homogenizer to screen minerals, which is easy to control. The mineral separator does not need to be placed on a cross (or tripod) on a support table. The mineral mortar with an average score is slowly fed onto the surface of the rotating groove through a feeding chute installed at the head of the spiral groove for sorting. The bottom of the spiral groove is installed in a valve block type new product cutting groove, and the selected new equipment will be divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be differentiated, gathered, and led out. The transverse plane of the spiral chute and the slope change of the curve are extremely suitable for the sorting of fine-grained materials. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile, monazite, phosgenite, wolframite, cassiterite, tantalum, niobium and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. Diagram of Coal Washing Spiral Chute Diagram of Coal Washing Spiral Chute

Illustration of coal washing spiral chute

Illustration of coal washing spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen