Maximum spiral chute

Maximum spiral chute

Introduction to the maximum spiral chute. The gravity separation spiral chute is a combination of the characteristics of spiral chute, spiral chute, shaking table, and centrifuges for mineral processing. After the Ministry of Metallurgical Industry organized relevant scientific research, and the design, universities, mines and other departments carried out appraisal, it was recognized that this kind of mechanical performance is excellent, and the separation goal has been improved. At the same time, it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry, and has been used in a large number of non-ferrous and Ferrous mines. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosphate ore, wolframite, placer tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals or non-metallic minerals with gravity difference from 0.3-0.02 mm fine materials. 2、 Operating principle: The spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) on the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute at the end of the installation spiral groove head, and selected for operation. The bottom is equipped with a valve block type equipment to obtain slots, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that collects and leads the intercepted multi head ore flow separately. The cross-section of the fiberglass chute and the change in slope of the curve are very suitable for the sorting of fine-grained materials. Maximum Spiral Chute 3. Features 1. Stable and easy operation of the sorting process 2. Allowing for a wide range of feed densities 3. Ultra high enrichment ratio and high recycling rate 4. Small footprint and water consumption 5. Simple structure without power 6. High yield. 7. Installation is simple and easy to operate. 8. Small investment, fast and effective maximum spiral chute . 4、 The structural composition of the spiral concentrator consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment intercepting groove, a product gathering hopper or groove support (including a cross or triangular frame), and so on. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The sorting surface of the spiral groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to evenly sort minerals, making control simple and convenient. The mineral screening device is not limited to being placed on a cross (or tripod) on a supporting table. Uniform mineral mortar is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be densely drawn out. The transverse section of the fiberglass chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 5、 Scope of utilization. The largest spiral chute spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, cassiterite, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon sand, rare earth ore, and other metal and non-metallic mineral materials with sufficient density ratio difference. Maximum spiral chute Maximum spiral chute

Maximum spiral chute

Maximum spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen