Product information display/Product display

How much is the labor cost per ton for installing the belt spiral chute

24-hour phone/WhatsApp：+8619870423316

How much is the labor cost per ton for installing the belt spiral chute

How much is the labor cost per ton for installing the belt spiral chute? Instructions. Gravity beneficiation is widely used in the beneficiation of metal and non-ferrous metals due to its small environmental pollution and low cost. Fiberglass reinforced plastic chute is one of the gravity separation equipment, with a structural characteristic that the cross-section is in a cubic parabolic state, suitable for handling finer particle sizes of -0.2MM. During the sorting process, no flushing water is required, and the fine, medium, and tailings are segmented at the tail of the chute. 2、 Usage method. The glass fiber reinforced plastic spiral chute shall be erected, the vertical line shall be calibrated, and the iron frame or wood shall be used to fix it in the proper position. The sand pump shall send the ore sand to the two ore feeding ports above the spiral, fill in the water, and adjust the concentration of the ore slurry. The ore slurry will naturally swirl from high to low, and produce a single coherent centrifugal force in the flow speed of the gyrating inclined surface, Through the effect of gravity and centrifugal force obtained through swirling flow, the sand ore is separated, and the concentrate flows into the beneficiation hopper and is connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand pit through pipelines, and then discharged by a slurry pump, completing the entire beneficiation process. How much is the manual labor cost for installing the belt spiral chute at 安装皮带螺旋溜槽人工多少钱一吨 per ton? Features. Fiberglass chute has attracted more attention among many gravity separation machines due to its low energy consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear mineral separation, no need for moving accessories, convenient Computerized maintenance management system, large processing output per unit size and other characteristics. The machine has a wide and relatively flat groove surface, and the mineral mortar flows in a laminar flow with a large area, making it more suitable for processing medium to fine (-4mm) particle size ores. We in China have made fiberglass spiral chutes with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200MM four head is about 4-6 T/H. How much is the labor cost for installing the belt spiral chute per ton? 4. Structural composition. The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The spiral groove has a pre made durable wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotating groove is equipped with a multi tube feeding homogenizer to evenly distribute the ore, and the operation is not complicated. The screening machine is freely stacked on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three types (or four categories) of new products along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export separately. The cross-section of the spiral chute and the slope of the curve change greatly in the separation of fine particle materials. 5、 Application. This machine is applicable to sorting iron, ferrotitanium, chromite ore, pyrite ore, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore sand, cassiterite, tantalum niobium, niobium ore or other non-ferrous metal ore, rare metal or non-metallic ore body with gravity difference from 0.3-0.02mm fine material. How much is the labor cost for installing the belt spiral chute per ton? @ @ 000 @ How much is the labor cost for installing the belt spiral chute per ton