Image of spiral chute renovation

Image of spiral chute renovation

Image of spiral chute renovation. 1、 Introduction: Gravity separation is widely used in the beneficiation of metallic and non-metallic minerals due to its low environmental pollution and low cost. The spiral beneficiation machine is one of the gravity beneficiation machines, with a cross-sectional shape of cubic parabola, suitable for processing finer particle sizes of -0.2mm. During the sorting process, do not add flushing water, and cut off the fine, medium, and tailings in sections at the bottom of the tank. 2、 Technical principle: The repair technology for the surface damage of the spiral chute. The transformation image of the spiral chute is uniform, and the slurry is slowly fed onto the surface of the spiral chute through the feeding chute installed at the head end of the rotating chute, implementing sorting. The tail of the rotating groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be distinguished and gathered. The cross-section of the fiberglass chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. Picture 3: Highlights and Features of the Transformation of the Spiral Chute: 1. High efficiency, high recovery rate, and accurate beneficiation; 2. No power required; 3. Lightweight, anti rust, durable, anti wear, and strong corrosion resistance; 4. Low operating costs and long application life; Strong applicability for fluctuations in ore feed volume, concentration, particle size, and grade. The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The structure of the fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product cutting groove, an equipment gathering hopper or groove support (including a cross or triangular frame). The rotating groove connected by the rotating disc is a key component. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, which is easy to control. The ore separator is not restricted from being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove through a feeding groove installed at the end of the spiral groove head, and selected for operation. The tail end of the spiral groove is installed in a valve block type new product selection groove, allowing the sorting equipment to be divided into three types (or four types) of new products along the radial direction according to grade. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multiple ore flows. The lateral plane of the spiral concentrator and the change in slope of the curve are particularly suitable for the separation of fine particle ore. 5、 Application field: FRP chute is suitable for separating fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and other metal and non-ferrous metal minerals with completely enough density ratio difference. Spiral chute renovation image Spiral chute renovation image

Image of spiral chute renovation

Image of spiral chute renovationRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen