Reverse spiral chute

Reverse spiral chute

Reverse Spiral Chute 1. Overview of Spiral Chute Tailings Selection. Reverse Spiral Chute Gravity Beneficiation Spiral Chute summarizes the characteristics of fiberglass spiral chutes, fiberglass spiral chutes, shakers, and centrifugal concentrators. After being evaluated and approved by relevant scientific research, design, universities, and mining departments organized by the Ministry of Metallurgical Industry, it is recognized that this type of equipment has superior performance, advanced sorting indicators, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry, Now it is widely used in nonferrous and Ferrous metals. This equipment is suitable for separating fine and small materials with Granularity of 0.3-0.02mm to obtain iron, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus and ethylene, tungsten ore sand, cassiterite, tantalum, niobium ore and other non-ferrous metals, rare mineral metals and this non-ferrous metal ore body with different specific gravity. 2、 Working principle. The mortar, similar to the reverse spiral chute, is slowly fed to the surface of the spiral groove by installing the feeding chute at the end of the rotating groove head, and sorting is carried out. The tail of the rotating groove is equipped with a valve type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the obtained multi-directional mineral flow to be collected and led out separately. The cross-section of the spiral chute, with a slope change of ten thousand, is suitable for the separation of fine particle materials. Reverse Spiral Chute III. Features. This equipment is used to separate iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten, tin placer, tantalum ore, niobium ore of 0.3-0.02mm fine material, and obtain other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity difference. This machine also has advantages such as stable sorting process, easy operation, wide range of feeding density, high enrichment ratio, high recovery rate, small area occupation, small water consumption, simple structure, no need for power, large processing capacity, easy installation, simple operation, low investment, and quick effectiveness. Reverse spiral chute 4. Plastic spiral chute production plant is composed of six parts: feeding distributor, feeding groove, spiral groove, product selection groove, equipment gathering bucket, and groove support (including cross or triangular frame). The rotating groove connected by spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together, with a pre made durable and wear-resistant layer on the selected surface of the spiral groove. It has the advantages of lightweight, sturdy, and long-lasting consumables. The head of the rotating groove is equipped with a multi tube ore feeder to evenly separate minerals, making it easy to control. The sorting machine is not limited to stacking on the cross (or tripod) of the support table. Uniform mineral mortar is slowly fed onto the rotating groove surface through the feeding chute at the end of the spiral groove head, and sorting is carried out. The bottom of the spiral groove is installed in a valve block type new product cutting groove, allowing other new equipment to be selected and classified into three types (or four types) of new equipment along the radial direction according to grade. Change the acquisition width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that gathers and leads out the selected multi head ore flow. The lateral plane of the spiral concentrator, with a change in the slope of the curve, is extremely suitable for the separation of fine particle materials. 5、 Field of use. The spiral chute is suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon ore and rare earth ore, and has enough Density contrast to obtain other metal and non-metallic ores. Reverse spiral chute Reverse spiral chute

Reverse spiral chute

Reverse spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen