Spiral chute repair technology

Spiral chute repair technology

Spiral chute repair technology 1. Description. The beneficiation chute belongs to the inclined flow sorting step. Mineral mortar is provided to a partially inclined chute or inclined surface. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer is so light that the mineral quickly flows out of the groove, while the lower part of the heavy mineral material stagnates inside the groove or flows out at a low speed from the lower end. After obtaining it, concentrate and tailings are obtained. Spiral concentrator is a mining and beneficiation machine, especially ideal for sand mining on beaches, river beds, beaches, and streams. The equipment is reasonably structured, easy to install, occupies a small area, has simple operation, stable beneficiation, clear mineral separation, large production capacity, high efficiency, high enrichment ratio, high recovery rate, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Utilize methods. The spiral chute is erected, the vertical line is calibrated, the iron shelf or wood is used to locate the suitable position, the slurry pump sends the sand ore to the two feed inlets above the spiral, enters the increased water, and adjusts the density of mineral slurry. The mineral mortar naturally swirls from high to low. A coherent centrifugal force occurs in the flow speed of the spiral inclined surface, and the efficiency is obtained by the gravity, Granularity and morphology of the sand ore, Separating the ore from the sand, the selected ore is discharged into the concentrate hopper and piped out, while the tailings are discharged into the tailings hopper and piped to the sand tank. Then, they are discharged by a sand pump, completing the entire beneficiation process. The repair technology of the spiral chute is three characteristics. Spiral chute repair technology This machine is suitable for sorting fine materials with Granularity of 0.3-0.02mm to get iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metals, rare mineral metals and non-ferrous metal minerals with different specific gravity. This equipment has the advantages of stable sorting steps, simple control, wide range of ore concentration tolerance, high enrichment, high recovery rate, small land occupation, low water consumption, simple structure, no power required, large output, easy installation, simple operation, small investment, and quick effectiveness. Spiral chute repair technology: The original spiral chute repair technology is . The structure of the spiral concentrator consists of a feeding average device, a cross (tripod), a feeding groove, a spiral groove, a selection groove, a gathering bucket, and a groove pillar. 5、 Applicable spiral chute technical indicators. This machine is suitable for sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore, tin placer, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare mineral metals and non-metallic ore bodies with gravity difference. Spiral Chute Repair Technology Spiral Chute Repair Technology

Spiral chute repair technology

Spiral chute repair technologyRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen