Laboratory spiral chute concentrator

Laboratory spiral chute concentrator

Laboratory spiral chute concentrator 1. Explanation: The chute sorting process includes inclined surface flow sorting. The slurry is fed to a inclined chute or slope, and under the assistance of water, the mineral particle group is loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay in the groove or are discharged from the bottom at low speed. After each is connected, fine beneficiation or tailings can be obtained. The spiral chute concentrator in the laboratory is an equipment for mining and beneficiation, especially ideal for mining sand along coasts, rivers, sandbanks, and streams. The product has the characteristics of appropriate structure, easy installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of small weight, moisture-proof, rust proof, not easy to corrode, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 Application techniques. Set up the spiral beneficiation machine, align it with the vertical line, use an iron frame or wood to fix it in a suitable direction, and use a sand pump to deliver the ore sand to the top two feeding ports of the spiral. Participate in supplementing water, adjust the concentration of mineral slurry, and the ore slurry will naturally swirl from high to low. In the rotating slope flow rate, an inertial centrifugal force will appear. By using the differences in density, specific gravity, particle size, and morphology of the sand ore, the efficiency of gravity or centrifugal force will be obtained through the swirl, Separating the sand ore, the concentrate flows into the selected ore hopper and is piped out. The tailings enter the tailings hopper and are piped to the sand tank, where they are then discharged by a mortar pump, completing the entire beneficiation process. Laboratory Spiral Chute Concentrator - Chinese spiral chute manufacturer, laboratory spiral chute concentrator III. Features and advantages: 1. Large scale, strong processing capacity, and objective conditions for mineral processing today are to create benefits through large-scale production. 2. Fine granulation: for the treatment of fine and micro particle grade minerals, especially the treatment of ore materials with a particle size of -0.047 mm, the original machine can generally ensure the recovery of+0.047 mm Granularity. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., GRP spiral chute has developed from simple use of gravity and water blocking force to composite centrifugal force, equipment vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, thereby increasing the recovery rate of ore materials. 4. With energy saving and environmental protection as the basic starting point, the area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure and convenient Computerized maintenance management system. Laboratory spiral chute concentrator 4. Structural composition: Can the spiral chute be used for selecting coal slime? The spiral concentrator consists of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, and a groove support (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is the main component. The rotating plate is made of fiberglass reinforced coal gangue and connected together through screws. The sorting surface of the rotating groove has a pre made durable wear-resistant layer. It also has the advantages of lightweight, sturdy, durable, and durable consumer goods. The head of the spiral groove is equipped with a multi tube ore feeder to evenly separate minerals, and the control is not complicated. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve type new product acquisition groove. The selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be collected and exported separately. The cross section and slope of the spiral chute are extremely suitable for the selection of fine particle materials. 5、 Use: tungsten tin spiral chute. This machine is suitable for separating small materials with a particle size of 0.3-0.02mm to get iron ore, ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten ore, tin ore, tantalum niobium ore, tantalum niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic mineral bodies with gravity differences. Laboratory Spiral Chute Concentrator Laboratory Spiral Chute Concentrator

Laboratory spiral chute concentrator

Laboratory spiral chute concentratorRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen