Product information display/Product display

Technical specifications of spiral chute

24-hour phone/WhatsApp：+8619870423316

Technical specifications of spiral chute

Introduction to Spiral Chute Forming Machine. Chute beneficiation involves a slope flow separation process. Mineral mortar is fed to some inclined inclined grooves or slopes. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material is quickly discharged to the outside of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or flows out at a slow speed from the lower part. After being obtained, the selected ore and tailings can be obtained. Spiral chutes are mining and beneficiation machinery, especially ideal for sand mining along coasts, rivers, sandbanks, and streams. The product is also characterized by suitable structure, easy installation, small footprint, easy operation, stable beneficiation, clear beneficiation, large processing capacity, high efficiency, ultra-high enrichment ratio, high recovery rate, and stable operation. It has the advantages of small weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 Application techniques. Let the glass fiber reinforced plastic chute stand up, calibrate the vertical line, fix the iron frame or wood at the appropriate position, and let the sand ore be sent to the two ore inlets on the spiral top by the mortar pump. Add make-up water to adjust the density of the mineral slurry. The mineral slurry naturally swirls from top to bottom, and there is a coherent centrifugal force in the rotating slope flow speed, depending on the density, specific gravity, Granularity and shape of the mineral sand, After the gravity and centrifugal force of the swirling flow, the ore and sand are separated, and the selected ore enters the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand pit, and then discharged by a sand pump, completing the entire beneficiation process. Technical index 3 of the 螺旋溜槽技术指标 spiral chute. Advantages and features: 1. Stable, easy to operate, and with a large density range. 2. High material processing output, high enrichment ratio, and high recycling probability., 3. Small footprint, low water consumption, simple construction, and no need for power. 4. Easy installation, easy operation, minimal investment, and fast returns. Technical index of spiral chute 螺旋溜槽技术指标 4. Structural composition. The spiral concentrator is composed of six parts, including a feeding homogenizer, a feeding chute, a rotating groove, a product cutting groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is the main component. The rotating plate is made of fiberglass reinforced coal gangue and connected together through screws. The sorting surface of the rotating groove has a pre made durable wear-resistant layer. It also has the advantages of lightweight, sturdy, durable, and durable consumer goods. The head of the spiral groove is equipped with a multi tube ore feeder to evenly separate minerals, and the control is not complicated. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve type new product acquisition groove. The selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be collected and exported separately. The cross section and slope of the spiral chute are extremely suitable for the selection of fine particle materials. 5、 Utilizing the spiral chute washing machine in the field, the fiberglass chute is suitable for processing 0.6-0.03MM and vein ores as well as minerals, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, sand tin, tantalum niobium ore, bay and riverbed ore sand or placer gold, and so on. Technical indicators of spiral chute: 螺旋溜槽技术指标 Technical indicators of spiral chute