Plastic spiral chute production plant

Plastic spiral chute production plant

Plastic spiral chute production plant 1. Equipment description: A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the slurry in the spiral rotation movement to achieve lightweight and heavy mineral separation. 2、 The production principle is the same: the slurry is slowly fed to the rotating groove surface through the feeding chute at the head end of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the sorting equipment is divided into three types according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block, and gather the selected multi-directional mineral flow through the equipment gathering hopper. The slope change of the cross-section and curve of the fiberglass chute is very suitable for the selection of fine particle materials. Plastic Spiral Chute Production Plant III. Highlights and Features 1. High efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Small weight, anti rust, wear-resistant, and strong corrosion resistance; Low cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force on the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. Plastic spiral chute manufacturer IV. According to the ore granularity processed, the chute can be divided into three types: (1) coarse chute. The maximum Granularity of ore feeding is above 2-3MM, and the maximum can reach 100-200MM. (2) Sand ore chute, processing 2-3 mm particle grade ore material. (3) Slurry spiral chute, feeding particle size ＜ 0.074mm. 5、 The use of spiral chutes in the field is suitable for processing 0.6-0.03MM and this vein ore as well as ore sand, but it is unfavorable for sorting when the mud content is high. It has now been widely used in the processing of iron, tungsten, tin ore, niobium tantalum ore, beach and riverbed placer or gold ore, and so on. Plastic Spiral Chute Production Factory Plastic Spiral Chute Production Factory

Plastic spiral chute production plant

Plastic spiral chute production plantRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen