Product information display/Product display

The benefits of grooved spiral chutes

24-hour phone/WhatsApp：+8619870423316

The benefits of grooved spiral chutes

The benefits of grooved spiral chutes are as follows: 1. Introduce that the chute sorting of minerals belongs to the inclined flow sorting process. The slurry is fed to a inclined chute or inclined surface, and under the push of water flow, the ore particles are loose and layered. The light minerals in the upper layer are quickly discharged from the groove, while the heavy mineral materials in the lower layer stay inside the groove or slowly discharge from the lower part. After being connected separately, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machines for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and river beds. The equipment has the characteristics of correct structure, simple installation, small land occupation, simple operation, stable beneficiation, clear beneficiation, strong processing ability, high efficiency, high concentration of beneficiation, high recycling rate, and reliable operation. It has the advantages of lightweight, moisture-proof, rust prevention, corrosion resistance, and strong adaptability to fluctuations in feed volume, concentration, particle size, and grade. 2、 The technical principle is that the mineral mortar is slowly fed onto the rotating groove surface through a feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. The advantages and characteristics of the 刻槽螺旋溜槽的好处 grooved spiral chute are high efficiency, high recovery rate, and correct mineral sorting; 2. No power required; 3. Small weight, anti rust, durable, anti wear, and strong corrosion resistance; 4. Low operating cost and long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. The advantages of grooved spiral chutes are: 刻槽螺旋溜槽的好处 4. The structural composition of the fiberglass chute is composed of six parts: a feeding distributor, a feeding chute, a rotating chute, an equipment acquisition chute, a product gathering hopper, or a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is the main component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a pre designed durable anti wear layer. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for screening ore, which is simple to operate. The mineral separator does not need to be restricted to placing on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through a feeding chute installed at the head end of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric annular tube that allows the selected variable ore flows to be densely exported. The transverse surface of the fiberglass spiral chute and the slope of the curve change, which is particularly suitable for the separation of small particle mineral materials. 5、 The application scope of the spiral concentrator is to process 0.6-0.03mm and vein ores and minerals, but high mud content is unfavorable for beneficiation. At present, it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal or riverside placer and gold ore, and so on. Benefits of grooved spiral chutes 刻槽螺旋溜槽的好处 Benefits of grooved spiral chutes