Spiral chute pitch

Spiral chute pitch

Spiral chute pitch 1 indicates that the chute selection belongs to the inclined surface flow selection process. Mortar is given to a partially inclined inclined chute or inclined surface. Under the push of water, the mineral particle group is loose and layered, and the upper layer of light minerals quickly flows out of the groove. The lower layer of heavy minerals are retained inside the groove or discharged slowly from the lower part. After receiving each, selected ore and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation on beaches, river beds, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear separation, strong processing capacity, high efficiency, high concentration, high recovery rate, and reliable operation. It has advantages such as light weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 By using the method, the fiberglass chute is erected, aligned with the vertical line, and secured in a suitable position with an iron frame or wood. The mineral sand is transported by a sand pump to the two feeding ports on the spiral, and supplementary water is added to adjust the concentration of the mineral sand slurry. The mineral sand naturally swirls from high to low, and an inertial centrifugal force appears in the swirling slope flow rate, resulting in differences in density, specific gravity, particle size, and morphology of the mineral sand, The gravity and centrifugal force generated by the swirling flow separate the ore, and the concentrate enters the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and transported to the sand pit through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. Spiral chute pitch 3. Characteristics or advantages 1. Super large, strong processing capacity, modern processing mineral objective conditions through large-scale to create benefits. 2. Fine granulation: for the treatment of fine particle level minerals, the Granularity is -0.047MM, and the original equipment can generally ensure the recovery of+0.047mm. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., spiral chute has developed from simple use of gravity and flow resistance to composite use of centrifugal force, equipment vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, thereby improving the ore recovery rate. 4. With energy conservation and environmental protection as the fundamental starting point, the area and space should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. The pitch of the spiral chute is . The fiberglass spiral chute is composed of six parts: a feeding distributor, a feeding chute, a spiral groove, an equipment acquisition groove, a product gathering hopper, and a support bracket (including a cross or triangular frame). The rotating groove connected by the rotating disc is the main accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The spiral groove has a pre made durable wear-resistant layer on the selected surface. She has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube ore feeding homogenizer to divide the ore dressing evenly, and the control is not cumbersome. The mineral sorting machine is freely stacked on a cross (or tripod) on a supporting table. The evenly divided slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product selection groove, and the selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The transverse plane and slope of the spiral chute are very suitable for selecting small particle materials. 5、 Scope of application Spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore or other metal and non-metallic ore with sufficient gravity difference. Spiral chute pitch Spiral chute pitch

Spiral chute pitch

Spiral chute pitchRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen