The difference between spiral chutes and spiral concentrators

The difference between spiral chutes and spiral concentrators

The difference between spiral chutes and spiral concentrators is that gravity beneficiation is widely used in the beneficiation of metal or non-ferrous metal ores due to its low pollution and cost. The spiral concentrator is one of the gravity separation machines, characterized by a cubic parabola shaped cross-section, suitable for processing finer particle sizes of -0.2 millimeters. In the sorting process, no flushing water is required, and the tailings are obtained by dividing them into sections at the tail end of the tank. 2、 The application technique is to make the fiberglass spiral chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in the appropriate position, use a mortar pump to deliver the sand ore to the two feeding ports on the spiral head, enter the supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the rotating inclined plane flow rate, an inertial centrifugal force will appear, resulting in differences in gravity, particle size, and morphology of the ore sand, By obtaining gravity and centrifugal force through swirling flow, the efficiency is achieved, allowing the separation of ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. The difference between the spiral chute and the spiral concentrator 3. The characteristics of the glass fiber reinforced plastic chute, such as low energy consumption, simple structure, small area occupation, simple operation, stable beneficiation, clear ore separation, no moving parts, convenient Computerized maintenance management system, and strong handling capacity per unit area, have attracted much attention among many gravity separation machines. The equipment has a relatively wide and stable groove surface, and the area where the slurry flows in a laminar flow is large, making it more suitable for processing medium to fine (-4mm) ore particles. China has made spiral chutes with diameters of 400, 600, 900, and 1200mm, Ф The processing capacity of 1200MM four head is about 4-6 tons/hour. The difference between a spiral chute and a spiral concentrator is . The structure of a fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre designed durable wear-resistant layer. He also has the advantages of lightweight, sturdy, durable and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to screen the ore evenly, making it easy to control. The ore separator is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove by the feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is installed in a valve type new equipment to obtain the groove, allowing the sorted new products to be divided into three categories (or four categories) along the radial direction according to the grade of the new equipment. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that densely leads out the selected multi head ore flow. The horizontal plane of the spiral concentrator, with a change in the slope of the curve, is particularly suitable for the separation of fine particle materials. 5、 Use This machine is suitable for separating small materials with a particle size of 0.3-0.02mm to obtain iron ore, ilmenite, Chromite, pyrite, zircon, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum niobium ore, tantalum niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic mineral bodies with gravity differences. Differences between Spiral Chutes and Spiral Concentrators Differences between Spiral Chutes and Spiral Concentrators

The difference between spiral chutes and spiral concentrators

The difference between spiral chutes and spiral concentratorsRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen