Product information display/Product display

Instructions for spiral chutes

24-hour phone/WhatsApp：+8619870423316

Instructions for spiral chutes

The manual 1 and introduction of the spiral chute for gravity beneficiation. The spiral chute for gravity beneficiation combines the characteristics of gravity beneficiation spiral chutes, spiral beneficiation machines, shakers, and centrifugal gold concentrators. It has been evaluated and approved by relevant scientific research, design, universities, or beneficiation enterprises organized by the Ministry of Metallurgical Industry. It is believed that the mechanical performance is superior, the sorting indicators are advanced, and it has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgy. It is now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare metals and non colored metal minerals with different specific gravity from fine materials with a Granularity of 0.3-0.02 mm. 2、 Working principle: The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. Instructions for the 螺旋溜槽的说明书 Spiral Chute: 3. Features: 1. Stable sorting process and easy operation. 2. Allowing for a wide range of feed densities. 3. High enrichment ratio and recycling efficiency. 4. Small land occupation and water consumption. 5. Simple structure without power. 6. Large processing capacity. 7. Easy installation and operation. 8. Instructions for the Spiral Chute: 螺旋溜槽的说明书 4 The fiberglass spiral chute is composed of six parts: a feeding distributor, a feeding chute, a spiral groove, an equipment acquisition groove, a product gathering hopper, and a bracket (including a cross or triangular frame) for this groove. The rotating groove connected by the rotating disc is the main accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The spiral groove has a pre made durable wear-resistant layer on the selected surface. She has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube ore feeding homogenizer to divide the ore dressing evenly, and the control is not cumbersome. The mineral sorting machine is freely stacked on a cross (or tripod) on a supporting table. The evenly divided slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product selection groove, and the selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The transverse plane and slope of the spiral chute are very suitable for selecting small particle materials. 5、 Scope of application: FRP spiral chute is applicable to the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metals and non-ferrous metal minerals with full density ratio difference. Instructions for Spiral Chutes 螺旋溜槽的说明书 Instructions for Spiral Chutes