Magnetic spiral chute

Magnetic spiral chute

Magnetic spiral chute 1. Brief introduction The gravity separation spiral chute is a combination of the characteristics of spiral chute, spiral chute, shaking table, and centrifuges for mineral processing. After relevant scientific research organized by the Ministry of Metallurgical Industry, and appraisal carried out by the design, universities, mines and other departments, it is recognized that this kind of mechanical performance is excellent, and the separation goal is improved. At the same time, it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. It has been used in non-ferrous and Ferrous mines in a large number of ways. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosphate ore, wolframite, placer tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals or non-metallic minerals with gravity difference from 0.3-0.02 mm fine materials. 2、 The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve type product selection groove, which divides the sorting equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering bucket allows the obtained variable mineral flow to be collected and exported. The cross section and slope of the curve of the spiral concentrator are very suitable for the separation of fine particle materials. Magnetic spiral chute III. Characteristic FRP spiral chute has attracted more attention among many gravity separation machines due to its low power consumption, simple structure, small area occupation, simple operation, stable beneficiation, clear beneficiation, no moving parts, convenient Computerized maintenance management system, large processing capacity per unit area, etc. The machine has a wide and relatively stable groove surface, and the mortar has a large area of laminar flow, which is more suitable for processing ores with medium and fine (-4mm) Granularity. Glass fiber reinforced plastic chutes with diameters of 400, 600, 900, and 1200MM have been manufactured domestically, Ф The production capacity of 1200mm four heads is about 4-6 tons/hour. Magnetic spiral chute IV. According to the particle size of the ore materials processed, the chute can be divided into three categories: (1) Coarse grained chute. The maximum Granularity of the feeding material is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The slurry spiral chute, with a feeding particle size of less than 0.074mm. 5、 This machine is used to separate 0.3-0.02mm fine materials to obtain iron, ferrotitanium, ferrochrome, ferrosulfur, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, niobium ore and other non-ferrous metal ores, rare mineral metals and non gold minerals with gravity difference. Magnetic Spiral Chute Magnetic Spiral Chute

Magnetic spiral chute

Magnetic spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen