current location: home > News and information > Knowledge of gravity beneficiation
24-hour phone/WhatsApp:+8619870423316
PVC plastic spiral chute I. Introduction The gravity separation spiral chute is a combination of the characteristics of spiral chute, spiral chute, shaking table and centrifuges for mineral processing. After the Ministry of Metallurgical Industry organized relevant scientific research, and the design, colleges and universities, as well as mining plants and other departments carried out appraisal, it was recognized that this kind of mechanical performance is excellent, and the separation goal has improved. At the same time, it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. Now it has been used in non-ferrous and Ferrous mines in a large number of ways. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosphate ore, wolframite, placer tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals or non-metallic minerals with gravity difference from 0.3-0.02 mm fine materials. 2、 Production principle: The screening device of the spiral concentrator is not limited to being placed on the cross (or tripod) of the support table. The average ore slurry is slowly fed to the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for sorting. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) categories radially according to grade. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that gathers and exports the obtained variable mineral flows. The transverse plane of the spiral chute and the slope of the curve vary greatly, making it suitable for the separation of small particle mineral materials. pvc plastic spiral chute 3. Features This equipment is used to separate iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosgenite, tungsten, tin placer, tantalite, niobium ore with a particle size of 0.3-0.02mm and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with different gravity differences. This machine also has advantages such as stable sorting process, easy operation, wide range of feeding density, high enrichment ratio, high recovery rate, small area occupation, small water consumption, simple structure, no need for power, large processing capacity, easy installation, simple operation, low investment, and quick effectiveness. PVC plastic spiral chute
4. The structure of the fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper or groove bracket (including a cross or triangular frame), and so on. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass reinforced coal gangue, and is bolted together. The selection surface of the spiral groove has a pre made durable and wear-resistant layer. He also has the advantages of light weight, firmness, and durability in consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, and the control is simple. The concentrator is freely placed on the cross (or tripod) of the support table. The uniform slurry passes through the feeding trough installed on the spiral groove head and slowly feeds onto the rotating groove surface for sorting. The tail end of the spiral groove is installed in a valve block type new product cutting groove, and the sorting equipment is divided into three types (or four types) of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that gathers and leads out the obtained multi-directional mineral flow. The cross section of the spiral concentrator and the slope change of the curve are extremely suitable for the separation of fine particle ore materials. 5、 This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to get iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, placer tin ore, tantalum niobium, niobium ore or other non-ferrous metal ores, rare metals and non-ferrous metal minerals with different density and specific gravity. PVC plastic spiral chute
PVC plastic spiral chute
PVC plastic spiral chute
PVC plastic spiral chuteRelated Information