Plan size drawing of spiral chute

Plan size drawing of spiral chute

The plan size drawing of the spiral chute 1 introduces that gravity separation is widely used in the beneficiation of metal and non-metallic ores due to its low environmental pollution and low cost. Glass fiber reinforced plastic chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain refined, medium, and tailings. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface by the feeding groove at the beginning of the spiral groove, and is selected. The tail end of the spiral groove is equipped with a valve block type equipment to cut the groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each equipment, the product gathering hopper will merge and export the obtained multi head ore flow differently. The transverse plane and curve slope of the fiberglass spiral chute are different, especially suitable for the selection of small particle materials. Spiral chute plane size drawing 3. Features 1. Stable sorting steps and simple control 2. Large allowable variation range of ore feed concentration 3. High enrichment and high recovery rate 4. Small floor area and small water consumption 5. Simple structure, no power required 6. Large output 7. Simple installation and operation 8. Small investment and quick effect spiral chute plane size drawing 4. Type according to the Granularity of processed mineral materials, Chutes can be divided into three types: (1) Coarse spiral chutes, with a maximum particle size of 2-3mm or more for feeding, and a maximum size of 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Applicable field: FRP chutes are suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and non nonferrous metal minerals with complete density ratio difference. Spiral chute plane size drawing Spiral chute plane size drawing

Plan size drawing of spiral chute

Plan size drawing of spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen