Spiral concentrator and spiral chute

Spiral concentrator and spiral chute

Spiral concentrator and spiral chute 1. Overview: The chute sorting belongs to the inclined flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the assistance of water flow, the mineral particles become loose and layered. The upper layer of light minerals are quickly discharged outside the groove, while the lower layer of heavy minerals are retained inside the groove or slowly discharged from the lower part. After each is collected, the selected ore and tailings can be obtained. The fiberglass spiral chute is a mining and beneficiation machine, making it ideal for mining and beneficiation of mineral sand on beaches, river beds, sand banks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume, density, Granularity and grade. 2、 Apply skills to make the FRP chute stand up, calibrate the vertical line, fix the iron frame or wood at the appropriate position, and let the sand ore be sent to the two ore inlets on the spiral top by the mortar pump. Add make-up water to mobilize the density of the mineral slurry. The mineral slurry naturally swirls from top to bottom. There is a coherent centrifugal force in the rotating slope flow speed, which is different in density, specific gravity, Granularity and shape of the mineral sand, After the gravity and centrifugal force of the swirling flow, the ore and sand are separated, and the selected ore enters the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand pit, and then discharged by a sand pump, completing the entire beneficiation process. spiral concentrator and spiral chute 3. The special spiral concentrator has attracted special attention among several gravity concentrators due to its low power consumption, simple structure, small floor area, simple operation, stable beneficiation, clear screening, no moving parts, convenient maintenance and management, and large processing output per unit size. The equipment has a wide or flat groove surface, and the area where mineral mortar flows in a laminar flow is quite large, making it more suitable for processing medium to fine (-4MM) particle sized ores. We have made spiral chutes with diameters of 400, 600, 900, and 1200mm domestically, Ф The processing capacity of 1200mm four heads is about 4-6 tons per hour. Spiral concentrator and spiral chute IV. According to the particle size of processed mineral materials, the chute can be divided into three types: (1) coarse particle spiral chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can be 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 Application field The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Spiral concentrator and spiral chute Spiral concentrator and spiral chute

Spiral concentrator and spiral chute

Spiral concentrator and spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen