540 spiral chute

540 spiral chute

540 Spiral chute I. Introduction The gravity separation spiral chute is a combination of the characteristics of spiral chute, spiral chute, shaking table, and centrifuges for mineral processing. After relevant scientific research organized by the Ministry of Metallurgical Industry, and appraisal carried out by the design, universities, mines and other departments, it is recognized that this kind of mechanical performance is excellent, and the separation goal is improved. At the same time, it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. It has been used in a lot of non-ferrous and Ferrous mines. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosphate ore, wolframite, placer tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals or non-metallic minerals with gravity difference from 0.3-0.02 mm fine materials. 2、 The method is to set up the fiberglass chute, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable position, and use a sand pump to deliver the ore to the two feeding ports on the spiral top. Add water to adjust the concentration of the ore slurry, and the ore slurry will naturally rotate from top to bottom, generating a single inertial centrifugal force in the rotating slope flow rate, based on the differences in the specific gravity, particle size, and state of the sand ore, Through the action of gravity and centrifugal force generated by swirling flow, the sand and ore are separated. The concentrate flows into the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand pit through a pipeline, and then discharged by a sand pump, completing the entire beneficiation process. 540 spiral chute 3. Characteristics 1. The sorting process is stable and easy to control 2. The allowable range of feed concentration changes is relatively large 3. The enrichment ratio is high and the recovery probability is high 4. The occupied land area is small and the water consumption is low 5. The structure is simple and no power is needed 6. The processing output is large 7. The installation is simple and easy to understand, and the operation is simple 8. The input is small and the effect is fast 540 spiral chute 4. The classification is based on the Granularity of the processed ore materials, Chutes can be divided into three types: (1) Coarse grained spiral chutes, with a maximum feed size of 2-3mm or more, and a maximum feed size of 100-200mm. (2) Sand ore chute, handling 2-3MM particle size ore. (3) Slime chute, Granularity of ore feeding is less than 0.074mm. 5、 Scope of application: The spiral concentrator is suitable for processing 0.6-0.03 millimeters of vein ore and this ore sand, but it is unfavorable for separation when the mud content is high. At present, it has been widely used for processing iron ore sand, tungsten, tin ore, tantalum niobium, coastal and riverside ore sand, and placer gold. 540 spiral chute 540 spiral chute

540 spiral chute

540 spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen