Spiral chute mold

Spiral chute mold

Spiral chute mold 1. Explanation: The chute sorting includes an inclined surface flow sorting process. Mortar is fed to some inclined grooves or slopes. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the outside of the groove, while the lower layer of heavy mineral is retained inside the groove or slowly discharged from the bottom. After each is taken, the selected ore and tailings can be obtained. The fiberglass chute is a mining and beneficiation machine, especially ideal for sand mining and beneficiation on beaches, rivers, sand banks, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The mineral mortar with equal working principles is slowly fed onto the surface of the rotating groove by installing the feeding chute at the end of the spiral groove head, and then selected. The tail of the spiral groove is equipped with a valve block type equipment to select the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows the obtained multi head ore flow to be collected and exported separately. The cross section and slope of the curve of the fiberglass chute are very suitable for the sorting of fine particle materials. Spiral Chute Mold III. Features: Fiberglass reinforced plastic chutes are particularly popular in various gravity beneficiation machinery due to their low power consumption, simple structure, small footprint, simple operation, stable beneficiation, clear beneficiation, no movement of accessories, easy maintenance and management, and large production capacity per unit size. The equipment has a wide and stable groove surface, and the area where mineral mortar exhibits laminar flow is large. It is more suitable for processing medium to fine (-4MM) particle sized ores. Our country has made fiberglass spiral chutes with diameters of 400, 600, 900, and 1200mm, Ф The production capacity of 1200mm four head is approximately 4-6 tons/hour. Spiral chute mold 4. Structure composition: Spiral chutes are composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove support. 5、 Applicable fields The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Spiral chute mold Spiral chute mold

Spiral chute mold

Spiral chute moldRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen