Manufacturer of wall mounted spiral chute

Manufacturer of wall mounted spiral chute

Manufacturer 1 of the wall mounted spiral chute explains that the chute sorting includes a slope flow sorting process. Mineral mortar is fed to some inclined grooves or slopes, and under the push of water, the mineral particle group becomes loose and layered. The upper layer of light mineral quickly flows out of the groove, while the lower layer of heavy mineral material stays in the groove or is discharged from the bottom at low speed. After being collected, the selected ore and tailings are obtained. Spiral chutes are mining and beneficiation machines, especially ideal for sand mining on coasts, rivers, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear ore separation, large processing volume, high efficiency, high concentration of beneficiation, high recovery rate, and reliable operation. There are also advantages such as small weight, moisture prevention, rust prevention, less corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Working principle: The spiral ore separator does not need to be limited to stacking on the cross (or tripod) of the support table. The same mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the beginning of the rotating groove, and selected for operation. The bottom is equipped with a valve block type equipment cutting groove, which divides the sorted products into three (or four) categories according to grade along the radial direction. Change the selection width of each equipment by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that enables the diverse mineral flows obtained to converge and export differently. The transverse plane of the fiberglass spiral chute and the slope of the curve change, making it particularly suitable for the selection of small particle materials. Manufacturer 3: Advantages and characteristics of the wall mounted spiral chute: 1. Stable, easy to control, and with a large concentration range. 2. Strong production and processing capacity of mineral materials, ultra-high enrichment ratio, and high recovery probability. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Easy to install, easy to operate, minimal investment, and fast recovery of benefits. Wall mounted spiral chute manufacturer IV. The structure of the spiral concentrator consists of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 The application scope of the spiral concentrator is to process 0.6-0.03mm and vein ores and minerals, but high mud content is unfavorable for beneficiation. At present, it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal or riverside placer and gold ore, and so on. Wall mounted spiral chute manufacturer Wall mounted spiral chute manufacturer

Manufacturer of wall mounted spiral chute

Manufacturer of wall mounted spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen