Wall mounted spiral chute supply

Wall mounted spiral chute supply

Wall mounted spiral chute supply 1. Introduce the chute beneficiation process, including inclined flow beneficiation. The slurry is fed to a inclined groove or inclined surface, and with the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter minerals in the upper layer are quickly discharged to the outside of the groove, while the heavy ore materials in the lower part stagnate in the inner groove or flow out at a slow speed from the lower part. After being collected separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for sand mining and beneficiation in bays, riverbanks, sandbanks, and streams. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, large processing output, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in feed volume, density, Granularity, and grade. 2、 The method of use is to set up the spiral concentrator, calibrate the vertical line, fix the iron shelf or wood in the proper position, send the sand ore to the two ore feeding ports on the spiral top by the slurry pump, add water, adjust the density of the mineral slurry, the slurry naturally swirls from high to low, generate a single coherent centrifugal force in the flow speed of the rotating slope, and obtain the difference in the specific gravity, Granularity and state of the sand ore, Through the action of gravity and centrifugal force obtained through swirling flow, the sand and ore are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. Wall mounted spiral chute supply 3. Characteristics 1. Stable sorting steps and easy control 2. Allowing for a wide range of ore concentration 3. High enrichment ratio and recovery rate 4. Small area occupation and low water consumption 5. Simple structure without power 6. Large production capacity 7. Simplified installation and simple operation 8. Low investment and quick results. Wall mounted spiral chute supply 4 The structure of the fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating pieces is the main component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the spiral groove has a pre made durable and wear-resistant layer. It also has the advantages of lightweight, solid, and durable consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer for ore dressing, which is simple and convenient to control. The sorting machine does not need to be placed on the cross (or tripod) of the support table to restrict stacking. The uniform mineral mortar is slowly fed onto the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for selection. The tail of the spiral groove is installed in a valve type new product selection groove, allowing the sorted new products to be divided into three types (or four types) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product agglomeration bucket is a concentric circular tube that leads to the differential aggregation of selected multi-directional mineral flows. The cross section of the fiberglass chute has different slopes, which is very suitable for the selection of fine particle mineral materials. 5、 Scope of application: FRP spiral chute is suitable for separating fine particle iron ore, ilmenite ore, chromite ore, pyrite, cassiterite, tantalum niobium ore, gold ore, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. Wall mounted spiral chute supply Wall mounted spiral chute supply

Wall mounted spiral chute supply

Wall mounted spiral chute supplyRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen