Manufacturing of rotating spiral beneficiation chutes

Manufacturing of rotating spiral beneficiation chutes

The production of a rotating spiral beneficiation chute: 1. Introduce the process of mineral separation by the chute, which belongs to the inclined flow separation process. The mortar is provided with some inclined grooves or inclined surfaces. Under the push of water flow, the mineral particles are loose and layered, and the lighter minerals in the upper layer quickly discharge out of the groove. The heavy minerals in the lower layer are retained inside the groove or discharged slowly from the lower part. After being collected separately, the concentrate and tailings can be obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for mining sand in bays, river beds, sandbanks, and streams. The equipment has reasonable structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Use the method to erect the spiral chute, calibrate the vertical line, fix it in the proper position with iron frame or wood, let the sand ore be sent to the two feeding ports on the top of the spiral by the slurry pump, add water, adjust the density of the mineral slurry, the mineral slurry naturally swirls from top to bottom, and generate a single coherent centrifugal force in the rotational slope flow speed, which can be distinguished by the specific gravity, Granularity and state of the mineral sand, Through the gravity and centrifugal force of swirling flow, the ore and sand are separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and transported to the sand pit through pipelines, and then discharged by a sand pump, completing the entire process of beneficiation. Manufacturing of rotary spiral beneficiation chute III. Features This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphate rock, tungsten ore, tin, tantalum niobium ore, tantalum niobium ore or other nonferrous metals, rare ore metals and nonferrous metal mineral bodies with specific gravity difference of 0.3-0.02mm fine materials. This equipment has the advantages of stable sorting steps, easy operation, wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small area occupation, low water consumption, simple structure, no power, strong processing ability, simple installation, easy operation, small investment, and quick effectiveness. The production of a rotating spiral beneficiation chute is made up of six parts: a feeding homogenizer, a feeding trough, a spiral trough, an equipment selection trough, a product gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, durable, and durable consumer goods that are not easily damaged. A multi tube feeding homogenizer is installed above the rotating groove to sort minerals equally, making it easy to control. The concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The evenly distributed slurry passes through the feeding chute installed at the head end of the spiral groove and slowly feeds onto the rotating groove surface for sorting. The tail of the spiral groove is equipped with a valve type new product acquisition groove, which allows the sorting equipment to be divided into three types (or four types) of new products along the radial direction according to grade. To adjust the orientation of the valve block and change the width of each new product, it is necessary to cut it off. The new equipment gathering bucket is a concentric annular tube that differentially collects and leads selected multi-directional mineral flows. The transverse surface of the fiberglass chute and the slope of the curve change greatly to adapt to the selection of fine-grained materials. 5、 The use scope of glass fiber reinforced plastic chute is suitable for the separation of fine grained iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic ores. Manufacturing of Rotating Spiral Mineral Processing Chutes Manufacturing of Rotating Spiral Mineral Processing Chutes

Manufacturing of rotating spiral beneficiation chutes

Manufacturing of rotating spiral beneficiation chutesRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen