Manufacturer of Ilmenite spiral chute

Manufacturer of Ilmenite spiral chute

Manufacturer I of spiral chute for Ilmenite beneficiation: Explain that the gravity concentration spiral chute is a combination of FRP spiral chute, gravity beneficiation spiral chute, shaking table and centrifugal concentrator. After relevant scientific research organized by the Ministry of Metallurgy, and the operation appraisal of the design, school and the concentrator and other departments, it is recognized that the machine has excellent performance and advanced beneficiation goals. At the same time, it has won the Scientific and Technological Research Achievement Award of the Ministry of Metallurgy Industry Ferrous mines are widely used. This machine is suitable for sorting iron, ferrotitanium, ferrochrome, pyrite, zircon sand, Rutile, monazite, phosphate rock, tungsten ore, tin ore, tantalum ore, tantalum niobium and other nonferrous metal, rare metal and nonferrous metal ore bodies with different specific gravity. 2、 The method of use is to set up the spiral concentrator, calibrate the vertical line, fix the iron shelf or wood in the proper position, send the sand ore to the two ore feeding ports on the spiral top by the slurry pump, add water, adjust the density of the mineral slurry, the slurry naturally swirls from high to low, generate a single coherent centrifugal force in the flow speed of the rotating slope, and obtain the difference in the specific gravity, Granularity and state of the sand ore, Through the action of gravity and centrifugal force obtained through swirling flow, the sand and ore are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. Ilmenite processing spiral chute manufacturer III. The characteristic spiral concentrator is more concerned among many gravity concentrators due to its low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear ore separation, no moving parts, easy maintenance and management, large output per area and other characteristics. The machine has a wide and flat groove surface, and the mortar flows in a laminar flow with a huge area. It is more suitable for processing medium to fine (-4mm) sized ores. China has produced fiberglass spiral chutes with diameters of 400, 600, 900, and 1200mm, Ф The processing capacity of 1200MM four head is about 4-6 T/H. The spiral chute manufacturer of Ilmenite ore dressing IV. The spiral chute is composed of six parts: ore feeder, ore feeder, rotary chute, product obtaining chute, equipment gathering hopper, and the trough support (including cross or tripod). The spiral groove connected by the rotating disc is a key component. The spiral plate is made of fiberglass (fiber reinforced coal gangue), and a wear-resistant layer is pre made on the sorting surface of the rotating groove through bolts. She has the advantages of lightweight, strong, and durable consumer goods. Above the spiral groove, a multi tube feeding homogenizer is installed to evenly distribute the ore, and the operation is not complicated. The screening machine is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type new equipment to intercept the groove, allowing the sorted new products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each new equipment by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that gathers and exports various obtained mineral flows. The lateral plane of the spiral concentrator and the slope change of the curve are extremely suitable for the selection of fine-grained materials. 5、 Application field: FRP chute is suitable for separating fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and other metal and non-ferrous metal minerals with completely enough density ratio difference. Ilmenite spiral chute manufacturer Ilmenite spiral chute manufacturer

Manufacturer of Ilmenite spiral chute

Manufacturer of Ilmenite spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen