Jiangxi Coal Washing Spiral Chute

Jiangxi Coal Washing Spiral Chute

Jiangxi Coal Washing Spiral Chute 1. Explanation: The chute selection includes an inclined flow separation process. When the mortar is fed to a partially inclined chute or slope, with the assistance of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral materials is quickly discharged from the outside of the groove, while the lower layer of minerals with high specific gravity are retained inside the groove or slowly discharged from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them particularly ideal for mineral mining along coasts, rivers, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of minerals, high yield, high efficiency, high beneficiation concentration ratio, high recovery probability, and stable operation. There are also advantages such as small weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Production principle: The spiral chute mineral separator does not need to be restricted from being stacked on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head for selection. The tail is equipped with a valve type equipment selection tank, which divides the sorted products into three types (or four categories) according to grade along the radial direction. Change the cutting width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that allows for the dense export of the obtained variable mineral flow differentiation. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine mineral particles. Jiangxi coal washing spiral chute III. Highlights and features: 1. Ultra high efficiency, high recycling rate, and accurate screening of minerals; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. Jiangxi coal washing spiral chute 4. Structural composition: The fiberglass chute is composed of a feeding homogenizer, a cross (tripod), a feeding trough, a rotating trough, a selection trough, a gathering hopper, and a trough pillar. 5、 The application scope of FRP chutes is to separate fine iron ore, Ilmenite, Chromite, pyrite, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and non nonferrous metal minerals with completely sufficient density and specific gravity difference. Jiangxi Coal Washing Spiral Chute Jiangxi Coal Washing Spiral Chute

Jiangxi Coal Washing Spiral Chute

Jiangxi Coal Washing Spiral ChuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen