Product information display/Product display

Chromium ore spiral chute

24-hour phone/WhatsApp：+8619870423316

Chromium ore spiral chute

Chromium ore spiral chute 1. Introduction: Gravity separation is widely used in metal and non-metallic ore beneficiation due to its low environmental pollution and low cost. Glass fiber reinforced plastic chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain refined, medium, and tailings. 2、 The working principle of the spiral mineral separator is that the mineral separator is freely placed on the cross (or tripod) of the support table. The same slurry is slowly fed onto the spiral groove surface of the feeding groove installed on the rotating groove head for sorting. The tail end is equipped with a valve block type product cutting groove, allowing the sorting equipment to be divided into three (or four) types according to grade along the radial direction. Change the acquisition width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that distinguishes and aggregates the selected multi-directional mineral flow. The transverse surface of the fiberglass chute has a slope change that is extremely suitable for the selection of fine-grained materials. 铬矿螺旋溜槽 Chromium Mine Spiral Chute III. Features and Highlights 1. Heavy duty, large processing output, and the principle of contemporary ore processing requires the creation of benefits through economies of scale. 2. Fine granulation is used for the treatment of fine particle minerals, especially for the treatment of mineral materials with a particle size of -0.047mm. Originally, the machine could basically ensure the recovery of particles with a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., GRP chutes have developed from the simple use of gravity and water blocking force to the composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals is enhanced and the separation of fine and micro particles is achieved, thereby increasing the recovery rate of mineral materials. 4. Based on energy saving, environmental protection and consumption reduction, the land area, space, water and electricity consumption should be small. 5. Simple and flexible operation, stable selection steps, simple structure, and convenient maintenance management. Chromium ore spiral chute 铬矿螺旋溜槽 4. The structure of the spiral concentrator consists of a feeding device, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove support. 5、 Use This product is used to separate fine materials with a particle size of 0.3-0.02mm to obtain iron ore, ilmenite ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus ethylene, tungsten ore, placer tin, tantalum, niobium ore or other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Chromium ore spiral chute 铬矿螺旋溜槽 Chromium ore spiral chute