Shicheng fiberglass spiral chute

Shicheng fiberglass spiral chute

Shicheng FRP spiral chute 1. It shows that the spiral chute is a combination of the characteristics of spiral concentrator, gravity separation spiral chute, shaking table, gold concentrator centrifuge. After the relevant scientific research organized by the Ministry of Metallurgical Industry, the design, universities, concentrators and other units have passed the operation appraisal, and that the mechanical performance is excellent, the separation goal is improved, and it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. It is now widely used in non-ferrous and Ferrous mines. This equipment is used to separate iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metal ores, rare metals and non-metallic minerals with gravity difference from fine materials with a particle size of 0.3-0.02 mm. 2、 Working principle: The fiberglass chute sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the head end of the rotating groove for sorting. The tail end is equipped with a valve block type product cutting groove, which divides the selected equipment into three categories (or four categories) radially according to grade. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export differently. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine particle ore materials. Shicheng FRP spiral chute 3. Features This machine is suitable for separating 0.3-0.02mm fine materials into iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus, tungsten, tin, tantalum, niobium and other non-ferrous metal ores, rare metals or non-metallic ore bodies with different density and specific gravity. This machine has the advantages of stable selection process, easy operation, wide range of feed density, ultra-high enrichment ratio, high recovery rate, small land area, low water consumption, simple structure, no need for power, large output, simplified installation, easy operation, low investment, and quick effectiveness. Shicheng GRP spiral chute IV. According to the particle size of the processed mineral materials, the chute can be divided into three types: (1) coarse particle spiral chute. The maximum Granularity of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral aggregate. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03MM and vein or placer ores, but it is unfavorable for sorting when the mud content is high. Now it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside ore sands, and gold mines. Shicheng fiberglass spiral chute Shicheng fiberglass spiral chute

Shicheng fiberglass spiral chute

Shicheng fiberglass spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen