Spiral chute sorting capacity

Spiral chute sorting capacity

Spiral chute sorting capacity 1. Overview: Gravity beneficiation spiral chutes combine the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifuges for beneficiation. They have been evaluated and approved by relevant scientific research, design, universities, or concentrators organized by the Ministry of Metallurgical Industry, and are believed to have superior performance and progress in sorting indicators. They have also won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. They are now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating fine materials with a particle size of 0.3-0.02 mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphate rock, tungsten ore, cassiterite, tantalum, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. 2、 Technical principle: The fiberglass spiral chute separator can be freely placed on a cross (or tripod) on a support table. Equal slurry is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove, and sorting is carried out. The tail is equipped with a valve type product selection slot, which divides the selected equipment into three (or four) categories according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. spiral chute sorting capacity III. Advantages and characteristics: 1. High efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; Low cost and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The sorting capacity of spiral chutes is . According to the particle size of the processed ore, the chutes can be divided into three types: (1) Coarse grained spiral chutes, with a maximum particle size of 2-3mm or more for ore feeding, and a maximum of 100-200mm. (2) Sand ore chute, processing 2-3MM particle grade ore. (3) Slurry spiral chute, feeding Granularity<0.074mm. 5、 The use of a field spiral concentrator is suitable for processing 0.6-0.03MM and vein ores and minerals, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, bay and riverside ore and placer gold. Spiral chute sorting capacity Spiral chute sorting capacity

Spiral chute sorting capacity

Spiral chute sorting capacityRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen