Manufacturer of spiral chutes for mining lump coal

Manufacturer of spiral chutes for mining lump coal

Manufacturer 1 of spiral chutes for mining lump coal. Introduction: Fiberglass reinforced plastic spiral chutes summarize the characteristics of gravity separation spiral chutes, spiral chutes, shakers, and centrifuges used for beneficiation. After being evaluated by relevant scientific research, design, school, and concentrator units organized by the Ministry of Metallurgical Industry, it is recognized that the machine has excellent performance, progress in sorting goals, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has been recognized in the field of non-ferrous metals Black mining metals are widely used. This product is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, tantalum niobium ore and other non-ferrous metal ores, rare mineral metals or non-metallic mineral bodies with gravity differences. 2、 The production principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, implementing sorting. The bottom of the rotating groove is equipped with a valve block type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows for the differentiation and aggregation of the obtained variable mineral flow. The cross-section of the spiral chute and the slope change of the curve are very suitable for the selection of fine particle materials. Manufacturer 3 of mining lump coal spiral chutes. Features: 1. Stable sorting process and easy control. 2. Wide range of allowable changes in feed density. 3. Ultra high enrichment ratio and high recovery probability. 4. Small occupied area and low water consumption. 5. Simple structure, no power required. 6. Strong processing capacity. 7. Simple installation and easy operation. 8. Small investment, quick results. Manufacturer of mining lump coal spiral chutes The structure of the spiral concentrator consists of a feeding equalizer, a cross (tripod), a feeding chute, a rotating groove, a selection groove, a gathering bucket, and a groove support. 5、 The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, cassiterite, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and non-metallic mineral materials with sufficient density ratio difference. Manufacturer of spiral chutes for mining lump coal: Manufacturer of spiral chutes for mining lump coal

Manufacturer of spiral chutes for mining lump coal

Manufacturer of spiral chutes for mining lump coalRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen