Reasonable Determination of Spiral Chute Angle

Reasonable Determination of Spiral Chute Angle

Reasonable determination of the angle of the spiral chute: 1. Overview: The beneficiation chute belongs to the slope flow sorting process. The slurry is fed to a inclined chute or inclined surface, and under the push of water, the mineral particle group is loose and layered. The upper layer of minerals is light and quickly discharged from the outside of the chute, while the lower part of minerals with high specific gravity stagnate inside the chute or slowly discharge from the lower part. After being obtained separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and mineral processing, especially ideal for mining sand by the sea, river beds, sand banks, and streams. The equipment has the characteristics of suitable structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high production capacity, high efficiency, ultra-high enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume or concentration, particle size, and grade. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface through a feeding chute installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected variable mineral flows to converge and export differently. The transverse plane and slope of the curve of the fiberglass spiral chute vary greatly, and the applicable range is for the selection of fine particle materials. Reasonable determination of the angle of the spiral chute. Advantages and characteristics: 1. High efficiency, high recovery rate, and accurate ore sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The friction caused by the appearance of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. The reasonable determination of the angle of the spiral chute is . 4. According to the particle size of the processed ore, the chute can be divided into three types: (1) coarse particle spiral chutes, with a maximum particle size of 2-3 millimeters or more for ore feeding, and a maximum of 100-200mm. (2) Mineral sand chute, processing 2-3 mm particle size mineral materials. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The spiral chute is suitable for processing 0.6-0.03MM and this vein and sand ore, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used for processing iron ore, tungsten, tin ore, tantalum and niobium, beach and riverside mineral sand and sand gold. Reasonable Determination of Spiral Chute Angle

Reasonable Determination of Spiral Chute Angle

Reasonable Determination of Spiral Chute AngleRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen