Spiral chute medium ore

Spiral chute medium ore

Spiral Chute Mining 1. Overview Gravity separation is widely used in the beneficiation of metal and non-ferrous metals due to its low environmental pollution and cost. Spiral chute is one of the gravity beneficiation machinery, with a structural characteristic of a cubic parabolic cross-section. It is used to handle finer particle sizes of -0.2MM. During the sorting step, do not add water to rinse, and select fine, medium, and tailings in sections at the bottom of the chute. 2、 The mortar with the same working principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the selection width of each product, the equipment gathering hopper will collect and export the obtained multi head ore flow. The transverse plane of the spiral chute and the different slopes of the curves are particularly suitable for the separation of small particles of mineral materials. 3. Characteristics: 1. Stable sorting process and easy operation. 2. Wide range of allowable changes in feed density. 3. Ultra high enrichment ratio and high recycling rate. 4. Small occupation area and low water consumption. 5. Simple structure without power. 6. Strong processing ability. 7. Easy installation and operation. 8. Low investment and quick results. 4. Fiberglass reinforced plastic spiral chute is composed of a feed homogenizer The feeding chute, spiral groove, product acquisition groove, equipment gathering hopper, and groove bracket (including cross or triangular frame) are composed of six parts. The rotating groove formed by connecting rotating pieces is the main component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the spiral groove has a pre made durable and wear-resistant layer. It also has the advantages of lightweight, solid, and durable consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer for ore dressing, which is simple and convenient to control. The sorting machine does not need to be placed on the cross (or tripod) of the support table to restrict stacking. The uniform mineral mortar is slowly fed onto the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for selection. The tail of the spiral groove is installed in a valve type new product selection groove, allowing the sorted new products to be divided into three types (or four types) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product agglomeration bucket is a concentric circular tube that leads to the differential aggregation of selected multi-directional mineral flows. The cross section of the fiberglass chute has different slopes, which is very suitable for the selection of fine particle mineral materials. 5、 The application scope of this machine is to separate iron, ferrotitanium, chromite ore, pyrite ore, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore sand, cassiterite, tantalum niobium, niobium ore or other non-ferrous metal ore, rare metal or non-metallic ore body with gravity difference from 0.3-0.02mm fine material. Spiral Chute Medium Mine Spiral Chute Medium Mine

Spiral chute medium ore

Spiral chute medium oreRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen