Product information display/Product display

Concrete spiral chute video

24-hour phone/WhatsApp：+8619870423316

Concrete spiral chute video

Video 1 of Concrete Spiral Chute: Product Description: A gravity separation machine that uses the inertial centrifugal force of mineral slurry during spiral rotation to achieve the separation of light and heavy minerals. 2、 Technical principle: The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. 混凝土螺旋溜槽视频 Video of Concrete Spiral Chute III. Characteristics and Highlights 1. Heavy duty, large processing output, and scale effect is required to build revenue for contemporary mineral aggregate processing. 2. Fine granulation is used for the treatment of fine and small particle grade mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., the spiral chute has developed from the simple application of gravity and flow resistance to the composite application of centrifugal force, equipment vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials and the separation of fine and micro particles are increased, thereby improving the mineral recovery rate. 4. Based on energy conservation, environmental protection and consumption reduction, the land area and space occupied should be small, and water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, and convenient maintenance management. Video of Concrete Spiral Chute: 混凝土螺旋溜槽视频 4. Structural Composition: The fiberglass spiral chute is composed of six parts: a feeding distributor, a feeding chute, a rotating groove, a product acquisition groove, an equipment gathering hopper, and a bracket for this groove (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The rotating groove has a durable wear-resistant layer made in advance on the selected surface. He also has the advantages of lightweight, strong, durable and durable consumables that are not easily damaged. The spiral groove is equipped with a multi tube ore feeding homogenizer to separate minerals, which is easy to operate. The mineral separator does not need to be restricted to placing on a cross (or tripod) on a support table. The evenly divided slurry is slowly fed onto the surface of the spiral groove through the feeding chute at the head of the rotating groove for sorting. The tail of the rotating groove is installed in the valve type new equipment selection groove, and other new equipment is selected to be divided into three (or four) types of new products according to grade along the radial direction. Change the cutting width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the obtained multi-directional mineral flows. The cross-section of the spiral chute and the slope change of the curve are very suitable for the separation of fine particle materials. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03mm and vein ore as well as sand ore, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used for processing iron ore, tungsten, tin ore, tantalum niobium ore, coastal and riverbed ore, or gold ore. Video of Concrete Spiral Chute 混凝土螺旋溜槽视频 Video of Concrete Spiral Chute