38 degree spiral chute video

38 degree spiral chute video

38 degree spiral chute video 1. Product introduction: A gravity beneficiation equipment that utilizes the inertial centrifugal force that occurs during the spiral rotation movement of mineral slurry to separate light and heavy mineral materials. 2、 The working principle is that the ore slurry is slowly fed onto the rotating groove surface through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse surface of the fiberglass chute has different slopes, which is very suitable for the separation of fine mineral particles. 38 degree spiral chute video 3. Features This machine is applicable to the separation of fine and small materials with a particle size of 0.3-0.02mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite, zircon, Rutile, monazite, phosphate ore, tungsten ore sand, tin, tantalum niobium ore, niobium and other non-ferrous metal ores, rare ore metals or non-metallic mineral bodies with density and specific gravity differences. This product has the advantages of stable and simple selection process, wide range of ore concentration tolerance, high enrichment ratio, high recovery probability, small land area occupation, low water consumption, simple structure, no power, large processing capacity, simplified installation, simple operation, small investment, and quick results. 38 degree spiral chute video IV. According to the size of ore processed, the chute can be divided into three types: (1) coarse spiral chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The sand ore chute is used to handle 2-3MM particle grade ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosgenite, tungsten, sand tin, tantalite, tantalum niobium or other nonferrous metals, rare ore metals or nonferrous metal mineral bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02MM. 38 degree spiral chute video 38 degree spiral chute video

38 degree spiral chute video

38 degree spiral chute videoRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen