How to arrange ten sets of spiral chutes

How to arrange ten sets of spiral chutes

How to arrange ten sets of spiral chutes? 1. Overview: Gravity separation spiral chutes summarize the characteristics of gravity separation spiral chutes, gravity beneficiation spiral chutes, shaking tables, and gold separation centrifuges. After being evaluated and approved by relevant scientific research, design, universities, and this beneficiation plant organized by the Ministry of Metallurgy, they are considered to have superior mechanical performance, advanced sorting indicators, and have won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. They are now in the field of non-ferrous metals Ferrous is used in great quantities. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ethylene, tungsten sand, sand tin, tantalum, tantalum niobium and other nonferrous metals, rare metals and non nonferrous gold mineral bodies with gravity difference from fine materials with Granularity of 0.3-0.02 mm. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface through a feeding chute installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected variable mineral flows to converge and export differently. The transverse plane and slope of the curve of the fiberglass spiral chute vary greatly, and the applicable range is for the selection of fine particle materials. How to discharge ten sets of spiral chutes at . Advantages and characteristics: 1. High efficiency, high recovery rate, and accurate ore sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low cost, long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. How to arrange the ten sets of spiral chutes at a rate of . The structure of the spiral concentrator consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper or groove bracket (including a cross or triangular frame), and so on. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The sorting surface of the spiral groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to evenly sort minerals, making control simple and convenient. The mineral screening device is not limited to being placed on a cross (or tripod) on a supporting table. Uniform mineral mortar is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be densely drawn out. The transverse section of the fiberglass chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 5、 The use of a range spiral concentrator is suitable for processing 0.6-0.03mm or vein ore and minerals, but it is unfavorable for separation when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin, tantalum niobium ore, bay or riverbank ore sand, and gold ore. How to arrange ten sets of spiral chutes How to arrange ten sets of spiral chutes

How to arrange ten sets of spiral chutes

How to arrange ten sets of spiral chutesRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen