Wear-resistant cast steel spiral chute

Wear-resistant cast steel spiral chute

Wear resistant cast steel spiral chute 1. It shows that the spiral chute is a combination of the characteristics of the spiral concentrator, gravity separation spiral chute, shaking table and gold concentrator. After the relevant scientific research organized by the Ministry of Metallurgical Industry, and the operation appraisal of the design, universities, concentrators and other units, it is believed that the mechanical performance is excellent, the separation goal is improved, and it has won the Scientific and Technological Research Achievement Award of the Ministry of Metallurgical Industry. It is now widely used in non-ferrous and Ferrous mines. This equipment is used to separate iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metal ores, rare metals and non-metallic minerals with gravity difference from fine materials with a particle size of 0.3-0.02 mm. 2、 Production principle: The spiral chute mineral separator does not need to be restricted from being stacked on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head for selection. The tail is equipped with a valve type equipment selection tank, which divides the sorted products into three types (or four categories) according to grade along the radial direction. Change the cutting width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that allows for the dense export of the obtained variable mineral flow differentiation. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine mineral particles. wear-resistant cast steel spiral chute 3. Features 1. Stable and easy to control selection steps 2. Wide range of allowable ore concentration 3. High enrichment ratio, high recycling rate, 4. Small occupied area and low water consumption 5. Simple structure, no power required 6. Large production capacity 7. Easy installation and operation 8. Low investment, quick effect, wear-resistant cast steel spiral chute 4 The structure of the fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating discs is the main component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is connected together through screws. The sorting surface of the spiral groove has a pre designed durable wear-resistant layer. She has the advantages of being lightweight, sturdy, and durable in using consumables. There is a multi tube feeding homogenizer above the rotating groove to screen minerals evenly, which is not cumbersome to operate. The screening machine does not need to be restricted from being placed on the cross (or tripod) on the support table. The uniform slurry is slowly fed to the surface of the spiral groove through the feeding groove on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve type new equipment selection groove, allowing the sorted new products to be divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that separates and merges the intercepted multi-directional mineral flows. The cross section of the spiral chute and the slope change of the curve are very applicable to the selection of fine materials. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, tungsten ore, tin ore, tantalum ore, niobium, and other non-ferrous metals, rare mineral metals and non colored metal minerals obtained by gravity difference from fine materials with Granularity of 0.3-0.02mm. Wear resistant cast steel spiral chute Wear resistant cast steel spiral chute

Wear-resistant cast steel spiral chute

Wear-resistant cast steel spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen