Product information display/Product display

The feeding concentration of the spiral chute is low

24-hour phone/WhatsApp：+8619870423316

The feeding concentration of the spiral chute is low

The feeding concentration of spiral chutes is one of the lowest. Overview: Chute sorting belongs to the inclined flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the assistance of water flow, the mineral particles become loose and layered. The upper layer of light minerals are quickly discharged outside the groove, while the lower layer of heavy minerals are retained inside the groove or slowly discharged from the lower part. After each is collected, the selected ore and tailings can be obtained. The fiberglass spiral chute is a mining and beneficiation machine, making it ideal for mining and beneficiation of mineral sand on beaches, river beds, sand banks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume, density, Granularity and grade. 2、 The usage method is to make the fiberglass chute stand up, align it with the vertical line, fix it in the appropriate position with an iron frame or wood, and send the sand ore to the two feeding ports on the top of the spiral through a slurry pump. The water is added and the mineral slurry concentration is adjusted. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the rotating inclined flow rate, which is distinguished by the gravity, particle size, and state of the mineral sand, By utilizing the gravity or centrifugal force of the swirling flow, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a mortar pump, completing the entire beneficiation process. The feeding concentration of the 螺旋溜槽的给矿浓度低 spiral chute is low, and its advantages and characteristics are: 1. Ultra high efficiency, high recycling rate, and precise mineral sorting; 2. Do not use power; 3. Lightweight, rust resistant, wear-resistant, and not easily corroded; 4. Low operating costs and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The feeding concentration of the spiral chute is low at 螺旋溜槽的给矿浓度低 . The structure of the fiberglass chute is composed of a feeding equalizer, a cross (tripod), a feeding chute, a rotating groove, a receiving groove, a gathering bucket, and a groove support. 5、 The use of a range spiral concentrator is suitable for processing 0.6-0.03mm or vein ore and minerals, but it is unfavorable for separation when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin, tantalum niobium ore, bay or riverbank ore sand, and gold ore. The feed concentration of the spiral chute is low at 螺旋溜槽的给矿浓度低 . The feed concentration of the spiral chute is low