Which is the best small spiral chute

Which is the best small spiral chute

Which is better for a small spiral chute? 1. Describe that the chute beneficiation involves the steps of inclined surface flow separation. The slurry is fed into a inclined chute or slope, and under the push of water, the mineral particle group is loose and layered. The lighter minerals in the upper layer quickly flow out of the groove, while the minerals in the lower layer with a higher specific gravity stay inside the groove or discharge from the bottom at a low speed. After being extracted, the concentrate and tailings are obtained. The spiral concentrator is an equipment for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large output, high efficiency, high enrichment ratio, high recycling rate, and reliable operation. There are also advantages such as small weight, moisture resistance, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume or concentration, particle size, and grade. 2、 Using a method to set up a spiral concentrator, align it with the vertical line, use an iron frame or wood to fix it in a suitable position, and use a sand pump to transport the ore to the two feeding ports on the spiral head. Add supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the flow rate of the inclined plane of the rotation, an inertial centrifugal force will occur, which will cause differences in the gravity, particle size, and shape of the sand ore, Through the influence of the gravity or centrifugal force of the swirling flow, the sand ore is separated, and the selected ore flows into the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand ore pool, and then discharged by a slurry pump, completing the entire beneficiation process. Small spiral chute is better than others. 3. Special features 1. Stable separation process and simple control. 2. Large allowable range of ore feed concentration. 3. High enrichment ratio and high recovery probability. 4. Small area occupied and low water consumption. 5. Simple structure and no power required. 6. Large processing capacity. 7. Simple installation and easy operation. 8. Small investment and quick results. 4. Small spiral chute is better than others The chute can be divided into three types according to the particle size of processed ore materials: (1) Coarse chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) Slurry spiral chute, feeding particle size ＜ 0.074 mm. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03mm and vein and placer ores, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, tin, niobium tantalum ore, coastal and river sand, and placer gold, among others. Which is the best small spiral chute? Which is the best small spiral chute

Which is the best small spiral chute

Which is the best small spiral chuteRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen