Spiral chute diameter affects equipment

Spiral chute diameter affects equipment

The diameter of the spiral chute affects the equipment. 1. Equipment Introduction: A gravity beneficiation equipment that utilizes the continuous centrifugal force generated by mineral mortar in spiral motion to achieve lightweight and significant mineral separation. 2、 Production principle: The spiral chute screening machine is freely placed on the cross (or tripod) on the support table. The uniform mortar is slowly fed to the surface of the rotating groove through the feeding groove installed at the beginning of the spiral groove, and the selection is carried out. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each equipment by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that converges and induces the obtained multi head ore flow. The cross-section of the fiberglass spiral chute and the slope of the curve change, which is very suitable for the separation of fine mineral materials. The diameter of the spiral chute affects equipment 3. Advantages or features: 1. High efficiency, high recovery probability, and accurate mineral sorting; 2. Do not use power; 3. Small weight, anti rust, durable and anti wear, durable and anti corrosion; Low cost and long service life; 5 pairs of strong applicability for fluctuations in feed volume, density, particle size, and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The diameter of the spiral chute affects the equipment . The structure of the spiral concentrator consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment cutting groove, a product gathering hopper or groove bracket (including a cross or triangular frame), and so on. The main component is the rotating groove connected by the rotating disc. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The sorting surface of the spiral groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to evenly sort minerals, making control simple and convenient. The mineral screening device is not limited to being placed on a cross (or tripod) on a supporting table. Uniform mineral mortar is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type new equipment to obtain the groove. The sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be densely drawn out. The transverse section of the fiberglass chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. 5、 Applicable field: FRP chutes are suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and non nonferrous metal minerals with complete density ratio difference. Spiral chute diameter affects equipment Spiral chute diameter affects equipment

Spiral chute diameter affects equipment

Spiral chute diameter affects equipmentRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen