Operating factors affecting spiral chutes

Operating factors affecting spiral chutes

The operating factors affecting the spiral chute are as follows: 1. Equipment introduction: A gravity separation machine used for mineral mortar to achieve lightweight and heavy mineral sorting due to the inertial centrifugal force that occurs during the rotary spiral movement. 2、 The average working principle of the slurry passes through the head of the spiral groove and is slowly fed to the rotating groove surface for sorting. The tail of the spiral groove is equipped with a valve type equipment to obtain the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each equipment, the product gathering hopper allows the selected multi-directional mineral flow to converge and lead out. The slope change of the horizontal plane and curve of the spiral concentrator is very suitable for the selection of fine particle materials. The operating factors that affect the spiral chute are three. Advantages and characteristics: 1. Stable, easy to control, and a large concentration range. 2. Strong material production and processing capabilities, high enrichment ratio, and high recycling rate. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Easy installation, easy operation, low investment, and fast returns. The operational factors affecting the spiral chute are . The structure of the spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, an equipment selection chute, a product gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove formed by connecting rotating discs is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue), and a wear-resistant layer is pre made on the sorting surface of the rotating groove through bolts. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is easy to operate. The mineral sorting device is freely placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding groove installed at the beginning of the rotating groove for selection. The bottom of the rotating groove is equipped with a valve block type new product acquisition groove, which allows the sorted new products to be divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that gathers and exports the selected variable mineral flows. The cross section and slope of the curve of the fiberglass chute are particularly suitable for the selection of fine particle materials. 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum ore, niobium ore and other non-ferrous metals, rare mineral metals or non-ferrous metal minerals with different density and specific gravity from small Granularity of 0.3-0.02MM. Operating factors affecting spiral chutes Operating factors affecting spiral chutes

Operating factors affecting spiral chutes

Operating factors affecting spiral chutesRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen