Product information display/Product display

Spiral chute washing machine

24-hour phone/WhatsApp：+8619870423316

Spiral chute washing machine

Spiral chute ore washing machine 1. Explanation: The chute sorting includes the inclined surface flow sorting process. Mortar is fed to some inclined grooves or slopes. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the outside of the groove, while the lower layer of heavy mineral is retained inside the groove or slowly discharged from the bottom. After each is taken, the selected ore and tailings can be obtained. The fiberglass chute is a mining and beneficiation machine, especially ideal for sand mining and beneficiation on beaches, rivers, sand banks, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The mineral mortar with the same working principle is slowly fed onto the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The tail of the rotating groove is equipped with a valve type product acquisition groove, and the sorting equipment is divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse plane of the fiberglass spiral chute has a change in the slope of the curve, which is extremely suitable for the selection of fine particle materials. 螺旋溜槽洗矿机 spiral chute ore washing machine 3. Characteristics 1. Stable sorting process and simple control 2. Wide range of allowable changes in ore concentration 3. High enrichment ratio and high recovery rate 4. Small footprint and low water consumption 5. Simple structure without power 6. Large production capacity 7. Easy to understand and operate installation 8. Low investment and quick effect spiral chute ore washing machine 螺旋溜槽洗矿机 4. Classification according to the processed ore particle size, The chutes can be divided into three types: (1) coarse chute, the maximum Granularity of ore feeding is more than 2-3MM, and the maximum can reach 100-200MM. (2) Sand ore chute, processing 2-3 mm particle grade ore material. (3) Slurry spiral chute, feeding particle size ＜ 0.074mm. 5、 Purpose This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten sand, tin ore, tantalum, niobium ore and other non-ferrous metals, rare mineral metals and non-ferrous metal minerals with gravity difference from fine materials with Granularity of 0.3-0.02mm. Spiral chute washing machine 螺旋溜槽洗矿机 Spiral chute washing machine