Product information display/Product display

Specification for installation of spiral chutes

24-hour phone/WhatsApp：+8619870423316

Specification for installation of spiral chutes

Spiral chute installation specification 1 describes that gravity separation is widely used in the beneficiation of metal and non-ferrous metals due to its low pollution and low cost. The fiberglass spiral chute is one of the gravity beneficiation machinery, with a structural feature of a cubic parabolic cross-section. It is used to handle finer particle sizes of -0.2mm, and does not require flushing water in the sorting process. The tail part of the chute is selected in sections to select fine, medium, and tailings. 2、 Working principle: The fiberglass chute sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the head end of the rotating groove for sorting. The tail end is equipped with a valve block type product cutting groove, which divides the selected equipment into three categories (or four categories) radially according to grade. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export differently. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine particle ore materials. 螺旋溜槽安装规范 spiral chute installation specification III, characteristics This product is suitable for separating small materials with a particle size of 0.3-0.02mm to obtain iron ore, ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus and ethylene, tungsten ore, tin placer, tantalite, niobium, and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity differences. This product has the advantages of stable selection process, easy operation, wide range of feeding density, ultra-high enrichment ratio, high recycling probability, small land area occupation, small water consumption, simple structure, no need for power, high output, simple installation, simple operation, small investment, and quick results. Specification for spiral chute installation 螺旋溜槽安装规范 IV. The chute can be divided into three categories according to the Granularity of the processed mineral materials: (1) coarse particle spiral chute. The maximum particle size of ore feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) The sand ore chute is used to handle 2-3MM sized ores. (3) Slurry chute, feeding Granularity is less than 0.074mm. 5、 Application field The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Installation Specification for Spiral Chutes 螺旋溜槽安装规范 Installation Specification for Spiral Chutes