Why doesn't the spiral chute add flushing water

Why doesn't the spiral chute add flushing water

Why does the spiral chute not add flushing water? 1. Explain that the chute selection includes an inclined flow sorting process. When the mortar is fed to a partially inclined chute or slope, with the assistance of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral materials is quickly discharged from the outside of the groove, while the lower layer of minerals with high specific gravity are retained inside the groove or slowly discharged from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them particularly ideal for mineral mining along coasts, rivers, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of minerals, high yield, high efficiency, high beneficiation concentration ratio, high recovery probability, and stable operation. There are also advantages such as small weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Use skills to make the spiral concentrator stand up, align it with the vertical line, use an iron shelf or wood to stabilize it in a suitable position, use the sand pump to transport the ore sand to the two feeding ports on the spiral head, add make-up water, and adjust the concentration of the ore slurry. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the flow rate of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the sand ore, By achieving the efficiency of gravity or centrifugal force through swirling flow, the ore and sand are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are connected to the sand pit through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Why don't you add flushing water to the spiral chute? 3. The characteristic spiral concentrator is particularly concerned among many gravity separation equipment because of its low power consumption, simple structure, small floor area, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, and large single area treatment output. The machinery has a wide and relatively flat groove surface, and the mineral mortar flows in a large area in a laminar flow, making it more suitable for handling medium to fine (-4mm) particle sized ores. We have produced fiberglass chutes with diameters of 400, 600, 900, and 1200MM in China, Ф The processing output of 1200mm four heads is about 4-6 tons per hour. Why doesn't the spiral chute add flushing water ? 4. The structure of the spiral chute is composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove support. 5、 Application field: Spiral chutes are used for processing 0.6-0.03mm or vein ores and minerals, but high mud content is unfavorable for sorting. It has now been widely used for processing iron, tungsten, sand tin, tantalum niobium mines, beach or river sand mines, and sand gold, among others. Why doesn't the spiral chute add flushing water Why doesn't the spiral chute add flushing water

Why doesn't the spiral chute add flushing water

Why doesn't the spiral chute add flushing waterRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen