Spiral chute manufacturing plant

Spiral chute manufacturing plant

Spiral chute manufacturing plant 1. Describe the beneficiation chute including the slope flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the help of flowing water, the mineral particle group is not tight and layered. The lighter mineral material on the upper part is quickly discharged to the outside of the groove, while the heavy mineral on the lower layer is retained in the groove or discharged from the bottom at low speed. After receiving the difference, the selected ore or tailings can be obtained. Fiberglass spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in bays, rivers, sandbanks, and streams. The product also has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 Working principle: The fiberglass chute separator does not need to be placed on a cross (or tripod) on a support table. The same mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head end of the spiral groove, and sorting is carried out. The bottom is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that converges and induces the obtained variable mineral flows. The transverse section of the fiberglass spiral chute and the change in slope of the curve are extremely suitable for the selection of fine particle materials. Spiral Chute Manufacturing Factory III. Highlights and Features 1. High efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Small weight, anti rust, wear-resistant, and strong corrosion resistance; Low cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force on the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. Spiral chute manufacturing plant 4. Structure composition: The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, an equipment acquisition groove, a product gathering hopper, and a support bracket (including a cross or triangular frame). The rotating groove connected by the rotating disc is the main accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The spiral groove has a pre made durable wear-resistant layer on the selected surface. She has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube ore feeding homogenizer to divide the ore dressing evenly, and the control is not cumbersome. The mineral sorting machine is freely stacked on a cross (or tripod) on a supporting table. The evenly divided slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product selection groove, and the selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The transverse plane and slope of the spiral chute are very suitable for selecting small particle materials. 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum ore, niobium ore and other non-ferrous metals, rare mineral metals or non-ferrous metal minerals with different density and specific gravity from small Granularity of 0.3-0.02MM. Spiral Chute Manufacturing Factory Spiral Chute Manufacturing Factory

Spiral chute manufacturing plant

Spiral chute manufacturing plantRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen