What is the effect of spiral chute coal slime selection

What is the effect of spiral chute coal slime selection

What is the effect of spiral chute coal slime separation? 1. Describe the inclined surface flow separation steps involved in chute beneficiation. The slurry is fed into a inclined chute or slope, and under the push of water, the mineral particle group is loose and layered. The lighter minerals in the upper layer quickly flow out of the groove, while the minerals in the lower layer with a higher specific gravity stay inside the groove or discharge from the bottom at a low speed. After being extracted, the concentrate and tailings are obtained. The spiral concentrator is an equipment for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large output, high efficiency, high enrichment ratio, high recycling rate, and reliable operation. There are also advantages such as small weight, moisture resistance, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume or concentration, particle size, and grade. 2、 Technical principle: The fiberglass spiral chute separator can be freely placed on a cross (or tripod) on a support table. Equal slurry is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove, and sorting is carried out. The tail is equipped with a valve type product selection slot, which divides the selected equipment into three (or four) categories according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. What is the effect of selecting coal slurry with a spiral chute? 3. Characteristics: 1. Stable and easy to operate selection steps. 2. Allowing different ranges of feed density. 3. Very high enrichment ratio and recovery rate. 4. Small footprint and low water consumption. 5. Simple structure without power. 6. Large processing capacity. 7. Simple and easy to understand installation and operation. 8. Low investment and quick results. How is the effect of selecting coal slurry with a spiral chute According to the Granularity of the processed ore materials, the chutes can be divided into three categories: (1) coarse spiral chutes. The maximum particle size of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Mineral sand chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074mm. 5、 Scope of application: FRP spiral chute is used to separate fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold ore, coal mine, monazite, Rutile, zircon ore, rare earth ore or other metal and non-metallic mineral materials with sufficient Density contrast. How is the effect of spiral chute coal slime selection How is the effect of spiral chute coal slime selection

What is the effect of spiral chute coal slime selection

What is the effect of spiral chute coal slime selectionRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen