Concentration of spiral chutes

Concentration of spiral chutes

The concentration of spiral chutes: 1. Overview: Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic minerals due to its small environmental pollution and low cost. Fiberglass reinforced plastic chute is a type of gravity sorting machine, with a structural characteristic that the cross-section presents a cubic parabolic state, suitable for handling finer particle levels of -0.2MM. In the sorting step, there is no need to add water for flushing, and the fine, medium, and tailings are segmented at the tail end of the chute. 2、 The method of use is to set up the spiral concentrator, calibrate the vertical line, fix the iron shelf or wood in the proper position, send the sand ore to the two ore feeding ports on the spiral top by the slurry pump, add water, adjust the density of the mineral slurry, the slurry naturally swirls from high to low, generate a single coherent centrifugal force in the flow speed of the rotating slope, and obtain the difference in the specific gravity, Granularity and state of the sand ore, Through the action of gravity and centrifugal force obtained through swirling flow, the sand and ore are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. The third advantage or characteristic of the concentration of the spiral chute is high efficiency, high recovery probability, and accurate mineral sorting; 2. Do not use power; 3. Small weight, anti rust, durable and anti wear, durable and anti corrosion; Low cost and long service life; 5 pairs of strong applicability for fluctuations in feed volume, density, particle size, and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The concentration of the spiral chute is . The structure of the spiral concentrator is composed of a feeding device, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 Use This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum, tantalum niobium ore and other nonferrous metals, rare mineral metals or nonferrous metal mineral bodies with different specific gravity from fine and small materials with Granularity of 0.3-0.02MM. Concentration of spiral chutes Concentration of spiral chutes

Concentration of spiral chutes

Concentration of spiral chutesRelated Information

• 

  Grooved spiral chute

• 

  Fiberglass spiral chute

• 

  Automatic ore discharge centrifugal conc

• 

  Shaftless drum screen